Description
The TIBERI PRO is a surface-mounted LED downlight that draws 30W direct from the mains at 220 to 240V AC and puts out 3000 lumens of cool white 4000K light. Its 115 degree beam angle spreads light far wider than a typical recessed can light, the term US buyers will know it by, so the output washes a broad area rather than throwing a tight pool. With an efficiency of 100 lm/W and a 90 CRI rating, colours read accurately and the integrated LED runs without a replaceable lamp.
Because it surface-mounts to the ceiling, this fitting suits rooms where a recessed cut-out is not practical, such as solid concrete ceilings, sloped soffits or sheltered porches and carports. At general lighting levels the 3000 lumens cover around 10 m², which makes a single unit a sound choice for a hallway, a utility area, a bathroom ceiling or a small kitchen. The wide 115 degree spread means it sits comfortably on standard ceiling heights and keeps shadows soft across the room.
The body is aluminium alloy in a white finish, round in form at Ø170 by 113mm and weighing 1.16kg. An IP54 rating makes it splash-resistant and suited to bathroom zones and covered outdoor spots like a porch, though it should be kept clear of fully-exposed positions, direct water jets and any submersion. The fitting runs straight off mains voltage with no separate driver to specify, mounts flush to the surface, and is not dimmable. Rated for 50,000 hours, it is one of several wattages and tones in the TIBERI PRO range.
Specification
| Power |
30W |
| Voltage |
220-240 AC |
| Luminous flux |
3000 lm |
| Efficiency |
100 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
115° |
| IP rating |
IP54 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø170 × 113 mm |
| Weight |
1.16 kg |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
Is this downlight recessed or surface mounted?
It is a surface-mounted fitting, fixing directly onto the ceiling rather than dropping into a cut-out. That makes it ideal for solid ceilings, concrete soffits or anywhere a recessed hole cannot be cut. At Ø170 by 113mm it sits proud of the surface, so allow clearance for the body depth.
Can it be used in a bathroom or outdoors?
The IP54 rating means it is splash-resistant and sheltered-rated, so it is fine for bathroom zones and covered outdoor areas such as a porch or carport. It should not be used in fully-exposed positions, under direct water jets or anywhere it could be submerged. For open outdoor sites choose an IP65 or higher fitting instead.
How many lumens does it give and what room size does it suit?
It delivers 3000 lumens of 4000K cool white light at 100 lm/W efficiency. At general lighting levels that covers around 10 m², which suits a hallway, utility room, small kitchen or bathroom from a single unit. The wide 115 degree beam keeps the light evenly spread.
How do I clean the fitting?
Wipe the white aluminium body and lens with a soft, dry or slightly damp cloth, avoiding abrasive cleaners that could mark the finish. Make sure the power is off and the fitting is cool first. Keeping the surface clear of dust helps maintain the full 3000 lumen output.