Description
The TIBERI PRO is a round recessed LED downlight that drops into the ceiling to give a clean, flush finish. It draws 30W direct from a 220 to 240V mains supply and puts out 3150 lumens of crisp 4000K cool white light, with Ra 90 colour rendering so finishes, fabrics and skin tones read accurately. The wide 90 deg beam spreads light evenly across the space below rather than throwing a tight pool, which makes it a practical recessed can light for broad general coverage. At 105 lm/W it is an efficient single fitting for its output.
The cool white tone and broad spread suit kitchens, utility rooms, hallways and bathrooms, where a bright, even wash is more useful than warm mood lighting. One unit covers around 10 m² at general lighting levels, so a typical kitchen or landing usually needs two or three spaced across the ceiling for consistent light with no dark patches. With an IP44 rating on the front face it is splash-resistant and can sit in sheltered bathroom zones or a covered porch or carport, though it should be kept clear of fully exposed positions and direct water jets. Allow ceiling void depth for the 70 mm body when planning the layout.
Built from aluminium alloy with a white finish, the housing helps draw heat away from the LED to support the rated 50,000 hour lifespan. It runs on mains voltage with no separate transformer to specify, and recesses into the ceiling via the cut-out rather than mounting on the surface. The fitting measures Ø190 by 70 mm, weighs 722 g and has a round profile. It is not dimmable, so it pairs with a standard switched circuit. The TIBERI PRO range includes other outputs and tones to match across a scheme.
Specification
| Power |
30W |
| Voltage |
220-240 AC |
| Luminous flux |
3150 lm |
| Efficiency |
105 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
90° |
| IP rating |
IP44/20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø190 × 70 mm |
| Weight |
722 g |
| Material |
Aluminium Alloy |
| Finish |
White |
Downloads
Frequently Asked
What size cut-out hole does it need?
The fitting has an overall trim diameter of 190 mm and recesses into the ceiling, so you will need to cut an aperture to suit the fixing collar rather than the full 190 mm trim. Always check the manufacturer cut-out figure on the spec sheet before drilling, as the cut-out is smaller than the visible trim.
How many do I need for a room?
Each downlight covers around 10 m² at general lighting levels from its 3150 lumens. A typical kitchen or hallway usually takes two or three units spaced evenly across the ceiling, giving consistent light with no shadowed corners.
Can it be used in a bathroom?
Yes, within the appropriate zones. The IP44 rating makes it splash-resistant and suitable for sheltered bathroom positions and covered outdoor spots like a porch, but it is not rated for fully exposed locations or direct water jets.
How do I clean it?
Wipe the white trim and lens gently with a soft, dry or slightly damp cloth once the fitting is switched off and cool. Avoid abrasive cleaners or solvents on the aluminium housing, as these can mark the white finish over time.