TIBERI PRO Ø140 20W Recessed Downlight Mains 90 deg Cool White - White

The TIBERI PRO is a round recessed downlight that runs straight from a 220-240V mains supply, drawing 20W to deliver 2100 lumens at a fixed 4000K cool white tone. Its wide 90 degree beam spreads light evenly across a space rather than spotlighting, which is what makes a recessed can light like this a sensible choice for general room illumination. With a Ra 90 colour rendering figure, colours read accurately under the light, useful where finishes and skin tones need to look true.

The fixed cool white output suits practical and task-led areas where a crisp, neutral light is wanted, such as kitchens, bathrooms, hallways and utility rooms. At general lighting levels a single unit covers around 7 m², so plan several across a larger ceiling and space them to avoid pooling and shadow. The IP44 rating means it copes with splashes and steam, so it can be fitted in bathroom zones and sheltered covered spots like a porch or carport, though it should be kept clear of fully exposed positions or direct water jets. It sits flush in the ceiling once recessed, giving a clean unobtrusive finish.

Built from aluminium alloy with a white finish, the fitting recesses into the ceiling and needs a cut-out to drop into, distinct from its Ø140 mm trim diameter. The 63 mm body depth should be checked against the void above before installation. It is a non-dimmable mains-voltage fitting, so no separate transformer is required and it wires directly to the supply. Rated for 50,000 hours, it is built to run for years before replacement. The TIBERI PRO range includes further wattage and colour options to match across a project.

Can this downlight be used in a bathroom?

Yes, the IP44 rating makes it splash and steam resistant, so it is suitable for bathroom zones and covered, sheltered outdoor spots such as a porch or carport. It should not be used in fully exposed positions or where it might face direct water jets.

What cut-out size does it need?

The fitting recesses into the ceiling and requires a cut-out hole for the body to drop into, which is smaller than the Ø140 mm trim diameter you see on the surface. Always confirm the exact cut-out against the supplied instructions, and check that the 63 mm body depth clears the ceiling void.

Is it dimmable?

No, this is a non-dimmable model. It wires directly to the 220-240V mains supply and gives a steady full output at all times, with no separate driver or transformer needed.

How do I clean it?

Wipe the white aluminium trim with a soft dry or slightly damp cloth once the fitting is switched off and cool. Avoid abrasive pads and solvents, which can mark the finish over time.