Description
The Tiberi is a round recessed LED downlight that drops into a ceiling or wall opening for clean, integrated lighting. It draws up to 29.4W and pushes out between 2970 and 3260 lumens depending on the chosen tone, with a wide 90 degree beam that spreads light evenly rather than tightly spotlighting. Colour is selectable across 3000K, 3500K and 4000K, so the same fitting can read as a warm domestic white or a crisper neutral white. American buyers shopping for a recessed can light will find this fills the same role, sitting flush in the ceiling line at a 230mm diameter.
Measuring Ø230 with a slim 39mm depth, the Tiberi suits kitchens, hallways, utility rooms and bathroom areas where its IP44 splash rating allows fitting in zoned bathroom spots and covered outdoor places such as a porch or carport. It is not built for fully exposed positions or direct water jets, so keep it clear of open weather. At general lighting levels the output covers around 10 to 11 m² per fitting, which makes it straightforward to plan a run across a larger room. For ceilings of standard height the 90 degree spread gives broad, low-glare coverage with fewer fittings than a narrow beam would need.
The body is aluminium alloy in a black finish, with a Ra 90 colour rendering that keeps skin tones and surfaces looking natural. It is rated for 50,000 hours and is not dimmable, so it is best paired with a standard switched circuit. Installation is recessed, dropping into the prepared cut-out in the ceiling or wall and secured by its spring fixings. Tiberi colour-selectable downlights are stocked by us in a range of sizes and outputs to match across a single scheme.
Specification
| Power |
max 29.4W |
| Luminous flux |
2970(WW) /3260(WN) /3160(NW) lm |
| Colour temperature |
3000/3500/4000K |
| Colour rendering (CRI) |
Ra 90 |
| Beam angle |
90° |
| IP rating |
IP44/20 |
| Dimmable |
No |
| Mounting |
Recessed Mount In The Ceiling, Recessed Mount In The Wall |
| Lifespan |
50,000 hours |
| Shape |
Round |
| Dimensions |
Ø230 × 39 mm |
| Weight |
392 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
What size cut-out does the Tiberi need?
The fitting has an overall diameter of Ø230mm, and it recesses into the ceiling or wall opening so the trim sits flush with the surface. Check the cut-out against the supplied template before drilling, as the cut-out hole is the recess the body drops into and is smaller than the visible trim diameter.
How do I change the colour temperature?
The Tiberi is colour selectable across 3000K, 3500K and 4000K using the onboard switch set during installation. This lets you pick a warm white for living areas or a neutral white for kitchens and task spaces, all from the one fitting.
Can it be used in a bathroom?
Yes, its IP44 rating makes it splash-resistant and suitable for the relevant bathroom zones as well as sheltered outdoor spots like a porch or carport. It should not be used in fully exposed positions or where it would face direct water jets.
How do I clean the fitting?
Wipe the visible trim and lens with a soft, dry or slightly damp cloth once the power is off and the unit has cooled. Avoid abrasive cleaners or solvents, which can mark the black aluminium finish.