Stick Track Spotlight Double 6W - White

The Stick double is a twin-head spotlight that fixes magnetically to the Stick low-voltage rail, carrying two aimable integrated-LED heads on one compact body so a single point on the run lights two targets at once. Each head tilts and turns on its mount, so the pair can pick out two objects side by side or angle together onto one. Lit, the two tight 24 degree beams read as a matched pair of warm 3000K pools; off, the 150mm matt white body keeps a low profile on the rail.

The two heads draw 6W together and give about 400 lumens in total from the 48V line, with a colour rendering above 90 so artwork, ceramics and timber keep their true tone under the beams. The narrow 24 degree spread makes this the more focused of the twin heads, so it concentrates light on small objects rather than washing a wide area. Because the body lives on the magnetic track, it slides and repositions by hand whenever a display changes, which suits a shelf of pieces, a gallery pairing or two framed prints.

The body is extruded aluminium in matt white and the fitting is rated IP20 for dry indoor rooms. Both LED modules are built in and rated to 50,000 hours, so there is no bulb to fit or replace. It dims by PWM through a compatible driver, and it needs the Stick rail and a remote 48V supply, neither of which is included, all of which we can supply alongside.

Datasheet

What kind of light does the Stick 6W double give?

Two tight beams of warm 3000K light from one body, about 400 lumens in total, with a colour rendering above 90. Each head spreads 24 degrees, so the pair picks out two small objects rather than washing a wide area.

How does it compare with the 10W double?

Tighter and softer. This 6W head runs 24 degree beams at 400 lumens for pinpoint accenting, while the 10W head spreads 30 degrees at 780 lumens for brighter, broader pools. We would use the 6W on small display pieces and the 10W on larger artwork.

Do the heads use bulbs, and can it be dimmed?

Both LED modules are built in and rated to 50,000 hours, so there is nothing to fit. It dims by PWM through a compatible 48V driver, which sits remote and is supplied separately.

What does it need to run?

The Stick recessed or surface rail and a remote 48V driver, not a standard mains ceiling point. The body clips to the track and can be slid and re-aimed later, so we can supply the rail, feed and driver to build the run.