Description
The Stick accent is a short linear bar that fixes magnetically to the low-voltage rail, laying a continuous line of integrated-LED light rather than a single spot. A wide 40 degree spread washes the surface below in an even band, so it grazes a textured wall, lights the length of a shelf or draws a line of brightness along joinery. Lit, it gives a warm 3000K wash; off, the low-profile matt black bar sits close to the track at just 36mm tall.
The bar runs at 8W and gives 870 lumens from the 48V line, with colour rendering above 90 so plaster, timber and fabric hold their true tone under the wash. Its 111mm length reads as a compact block of light that can be repeated along a run, several bars sharing one recessed or surface rail to build a longer continuous band, then repositioned by hand when a layout changes, which suits a hallway, an alcove or a display wall.
The body is extruded aluminium in matt black and the fitting carries an IP20 rating for dry indoor rooms. The LED is built in and rated to 50,000 hours, so there is no bulb to fit. It dims by PWM through a compatible driver, and it needs the Stick rail with a remote 48V supply, neither of which comes with the bar, both of which we can supply alongside.
Specification
| Number of lights |
Linear / continuous |
| Light source |
Integrated LED, 8W total (50,000h) |
| Luminous flux |
870 lumens |
| Colour temperature |
3000K (warm white) |
| CRI |
Ra > 90 |
| Beam angle |
40 degrees |
| Length |
111.3mm |
| Height |
36.1mm |
| Projection |
16.2mm |
| IP rating |
IP20 |
| Dimmable |
Yes, PWM |
| Voltage |
48V DC (remote driver required, not included) |
| Mounting |
Stick magnetic rail (recessed or surface) |
| Adjustment |
Fixed line; repositions on the rail |
| Insulation class |
Class III |
| Frame / Structure finish |
Matt black aluminium |
| Materials |
Extruded aluminium |
Downloads
Datasheet
Frequently Asked
What kind of light does the Stick 8W accent give?
A wide, even wash of warm 3000K light at 870 lumens across a 40 degree spread, with colour rendering above 90. It grazes a surface as a continuous band rather than picking out a single point like a spotlight.
How is it different from a Stick spotlight?
The accent is a linear bar that lays a broad line of light along a wall or shelf, where the spotlight throws one aimed beam at a target. Choose the accent for grazing texture or lighting a run, the spot for a framed picture.
Does it use a bulb, and can it be dimmed?
The LED is built in and rated to 50,000 hours, so there is no bulb to fit. It dims by PWM through a compatible 48V driver, which sits remote and is supplied separately.
What does it need to run?
The Stick recessed or surface rail and a remote 48V driver, not a standard mains ceiling point. The bar clips to the track and several can be lined up into a longer band, so we can provide the rail, feed and driver to build the run.