Description
The Stick accent is a linear bar that fixes magnetically to the low-voltage rail, laying a continuous line of integrated-LED light rather than a single spot. A wide 40 degree spread washes the surface below in an even band, so it grazes a long stretch of textured wall, lights a run of shelving or draws a bright line along joinery. Lit, it gives a clean warm 3000K wash; off, the low-profile matt black bar sits close to the track at just 36mm tall.
This is the longest accent in the black range at 219mm, running 16W for 1750 lumens from the 48V line, so it covers more surface and reads brighter than the shorter 8W bar, with colour rendering above 90 so plaster, timber and fabric hold their true tone. Several can share one recessed or surface rail to build an unbroken band, then reposition by hand when a layout changes, which suits a feature wall, a stairwell or a longer retail run.
The body is extruded aluminium in matt black and the fitting carries an IP20 rating for dry indoor rooms. The LED is built in and rated to 50,000 hours, so there is no bulb to fit. It dims by PWM through a compatible driver, and it needs the Stick rail with a remote 48V supply, neither of which comes with the bar, both of which we can supply alongside.
Specification
| Number of lights |
Linear / continuous |
| Light source |
Integrated LED, 16W total (50,000h) |
| Luminous flux |
1750 lumens |
| Colour temperature |
3000K (warm white) |
| CRI |
Ra > 90 |
| Beam angle |
40 degrees |
| Length |
219.5mm |
| Height |
36mm |
| Projection |
16.2mm |
| IP rating |
IP20 |
| Dimmable |
Yes, PWM |
| Voltage |
48V DC (remote driver required, not included) |
| Mounting |
Stick magnetic rail (recessed or surface) |
| Adjustment |
Fixed line; repositions on the rail |
| Insulation class |
Class III |
| Frame / Structure finish |
Matt black aluminium |
| Materials |
Extruded aluminium |
Downloads
Datasheet
Frequently Asked
What kind of light does the Stick 16W accent give?
A wide, even wash of warm 3000K light at 1750 lumens across a 40 degree spread, with colour rendering above 90. As the brightest accent in the range it grazes a longer wall or feature as a continuous band.
How does it compare with the 8W accent bar?
Same 40 degree wash, but longer at 219mm and much brighter at 1750 lumens against 870, so it covers roughly twice the wall. We would use it on a feature wall or a longer run where the shorter bar would fall short.
Does it use a bulb, and can it be dimmed?
The LED is built in and rated to 50,000 hours, so there is no bulb to fit. It dims by PWM through a compatible 48V driver, which sits remote and is supplied separately.
What does it need to run?
The Stick recessed or surface rail and a remote 48V driver, not a standard mains ceiling point. The bar clips to the track and several can be lined up into a longer band, so we can provide the rail, feed and driver to build the run.