Stader 200W LED Floodlight 360x90 60 deg Cool White - Grey

The Stader is a 200W LED floodlight built for high-output outdoor work, drawing 30000 lumens at an efficiency of 150 lm/W from a 220-240V AC supply. Its 4000K cool white output sits at the neutral-bright end of the scale, paired with a focused 60 degree beam that concentrates light into a defined area rather than spilling it sideways. Buyers in North America will find this is what they call an LED flood light or area light, the kind of fixture mounted high to wash a yard or façade. At 30000 lumens it stands in for roughly a 1500W halogen floodlight, so a single Stader replaces a bank of older lamps while drawing a fraction of the power.

Coverage suits large outdoor spaces such as car parks, loading bays, building frontages, sports surfaces and commercial yards. The 60 degree beam gives a controlled, medium-throw spread, so it works best mounted at height and angled across the area you want to cover rather than straight down. Because the optic is comparatively narrow for the output, the Stader pushes a strong, far-reaching pool of light, which makes it well suited to security duty along boundaries, gates and approach roads where you need brightness at distance. Position two or more across a wide frontage to fill the gaps between beams.

Construction is aluminium alloy with a grey finish, which sheds heat well and stands up to the weather. The fitting is rated IP66, so it is sealed against dust and powerful water jets and is fully suited to exposed outdoor and wet locations, while the IK10 impact rating means it resists knocks and tampering in public or industrial settings. It mounts to a wall, ceiling or surface via its adjustable bracket, runs direct from mains with no separate transformer, and is rated for 100,000 hours of service. This model is not dimmable. The Stader range offers further wattages for matching larger and smaller sites.

Product Specification Sheet

Range Datasheet

How bright is the Stader 200W and what does it replace?

It delivers 30000 lumens at 150 lm/W, which is a very high output for a single floodlight. As a rough guide it replaces a halogen floodlight of around 1500W, since older halogen units produced roughly 20 lumens per watt. One Stader therefore covers what previously took several traditional lamps.

Can it be used outdoors in wet weather?

Yes. The Stader is rated IP66, meaning it is fully protected against dust and high-pressure water jets, so it is suitable for exposed outdoor and wet locations. It also carries an IK10 impact rating for resistance to knocks and tampering.

How far does the beam throw and what area does it cover?

The 60 degree beam angle gives a controlled, medium-throw spread that reaches well across larger spaces rather than spilling light to the sides. Mounted at height and angled across the target area it suits car parks, yards and building frontages. For very wide sites, use two or more units to fill the gaps between beams.

How do I clean and maintain the lens?

Switch the fitting off and let it cool, then wipe the front lens with a soft damp cloth to clear dust, grime and salt build-up that can dull the output. Avoid abrasive pads or solvents on the aluminium body. A periodic clean keeps the 30000 lumen output performing at its best over its 100,000 hour life.