Description
The Soren O-SR is a round recessed downlight that takes a single GU10 lamp, with a maximum rating of 20W and a luminous flux of 250 lm at a cool 6500K daylight tone. Across the Atlantic this style sits within what most buyers call a recessed can light, dropping into the ceiling so the trim sits flush and the GU10 reflector lamp directs its output downward. Running on 220-240V AC mains, it gives a clean, bright pool of light suited to spaces where crisp visibility matters more than a warm glow.
Daylight output at this brightness works well in compact rooms and over specific points such as a worktop edge, hallway run or small utility area, where you want the light placed exactly rather than spread wide. At general lighting levels the single fitting covers around 1 m², so plan several across a ceiling on a grid to build even coverage rather than relying on one to light a whole room. With an overall diameter of 90 mm it suits standard recessed spacing, and the cool 6500K tone keeps colours looking true for tasks like reading labels, sorting or cleaning. It is for dry indoor use only and should be kept clear of bathrooms, porches and any damp or outdoor location.
The body is finished in silver with a glass element, and at 210 g it is light enough for straightforward recessed installation into a suitable ceiling void. It carries an IP20 rating, confirming it as an indoor fitting, and mounts recessed into the ceiling with the GU10 lamp held in the standard bi-pin holder. Rated for around 20,000 hours, the replaceable GU10 format means the lamp can be swapped without changing the fixture. Soren downlights are stocked by Niori in further sizes and tones to match across a scheme.
Specification
| Power |
max 20W |
| Voltage |
220-240 AC |
| Luminous flux |
250 lm |
| Colour temperature |
6500K |
| IP rating |
IP20 |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
20,000 hours |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Round |
| Dimensions |
Ø90 × 22 mm |
| Weight |
210 g |
| Material |
Glass |
| Finish |
Silver |
Downloads
Frequently Asked
What size cut-out does this downlight need?
The fitting has an overall diameter of 90 mm, so it needs a ceiling cut-out sized to suit that trim, which is the hole the body drops into rather than the visible trim face. Always check the recess against your ceiling void depth and confirm the cut-out before drilling. The 22 mm fitting depth keeps the housing shallow for most plasterboard ceilings.
Is this downlight suitable for a bathroom or outdoor use?
No. It carries an IP20 rating, which means it is for dry indoor use only. Keep it clear of bathrooms, porches, garages with damp and any outdoor or sheltered-outdoor position.
How many will I need to light a room?
At general lighting levels each fitting covers around 1 m², so a typical room needs several spaced across the ceiling on a grid. The 250 lm cool output is best treated as accent or task placement rather than a single room light. Plan the layout to give even coverage across the area you want lit.
How do I clean the fitting?
Wipe the silver trim and glass with a soft, dry or slightly damp cloth once the lamp has cooled and the power is off. Avoid abrasive cleaners or solvents that could mark the finish. Regular gentle cleaning keeps the daylight output looking bright and clear.