Soren O-SR GU10 Recessed Downlight Warm White - Silver

The Soren O-SR is a round recessed downlight that takes a single GU10 lamp rated up to 20W, sitting flush into the ceiling for a clean, low-profile finish. It puts out around 250 lumens at a warm white 3000K, giving a soft, settled glow rather than a bright task wash. The fitting measures Ø90mm with a 22mm depth and uses a PAR16-format GU10 light source. Buyers in the US will recognise this format as a small recessed can light, here built around the GU10 cap rather than an integrated module.

Indoors this downlight suits hallways, landings and smaller rooms where the look matters as much as the light, and works well in clusters where several fittings share the load across a larger ceiling. With around 1 m² of useful coverage per fitting at general lighting levels, plan the spacing across the room rather than relying on a single point. The warm 3000K tone reads comfortably in living spaces and bedrooms. As an IP20 fitting it is for dry indoor positions only, so keep it clear of bathrooms, porches and any damp or sheltered-outdoor location.

The body is finished in silver with a glass element, and the round trim gives a neat ceiling line once recessed. It mounts into a ceiling cut-out and runs on a standard 220-240V AC supply through the GU10 lamp, so the light source is replaceable rather than sealed in. Dimming depends on the GU10 lamp fitted and any compatible dimmer on the circuit. Rated for around 20,000 hours of use, it is a straightforward recessed option for indoor schemes. Other finishes and matching fittings are available across the wider Soren range from us.

What cut-out size does it need?

The Soren O-SR has an overall trim diameter of 90mm, so allow a ceiling cut-out slightly smaller than this to seat the fitting cleanly. Always check the recess hole against the spec sheet before drilling, as the cut-out is the aperture the body drops into, not the visible trim diameter. Leave enough depth above the ceiling for the 22mm body plus the GU10 lamp.

Is it dimmable?

Dimming depends on the GU10 lamp you fit rather than the fitting itself, since the light source is replaceable. Fit a dimmable GU10 lamp and pair it with a compatible trailing-edge dimmer for smooth control. A non-dimmable lamp will run at full output only.

How many do I need for a room?

Each fitting gives around 250 lumens, covering roughly 1 m² at general lighting levels, so most rooms need several spaced evenly across the ceiling. For a hallway or small bedroom, plan a regular grid rather than one central point. Add more fittings where you want brighter, more even coverage.

How do I clean it?

Switch off and let the lamp cool, then wipe the silver trim and glass element with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can mark the finish over time. Keep moisture away from the lamp and connections, as this is an IP20 indoor fitting.