Description
The Soren O-BL is a round recessed downlight that takes a single GU10 lamp at up to 20W, dropping flush into the ceiling for a clean, low-profile finish. American buyers will recognise this format as a recessed can light, here in a compact trim rather than a deep housing. It runs on 220 to 240V AC mains and uses a PAR16 (GU10) light source, so the exact brightness and beam are set by whichever GU10 lamp you fit. With the bulb removed, the fitting measures Ø90 by 22mm, keeping its footprint and ceiling intrusion to a minimum.
The Soren O-BL suits hallways, landings, kitchens, living rooms and bedrooms where a discreet recessed downlight is wanted, used singly as an accent or grouped across a ceiling for even coverage. Because the lamp is not supplied, output and spread depend on the GU10 you choose, so plan spacing around the beam angle of that bulb rather than a fixed figure. It is an indoor fitting rated IP20, so keep it to dry interior rooms and clear of bathroom zones, porches and any damp or exposed locations. For standard ceiling heights, a regular grid of these gives a tidy, glare-controlled wash.
The fitting is built around a silver glass body with a round profile, giving a crisp look against a painted ceiling. It recesses into the ceiling and holds a GU10 lamp directly, so there is no separate driver or transformer to source, just the mains supply behind the plasterboard. Whether the light dims depends on the GU10 lamp fitted, as the fixture itself imposes no limit. Rated at 20,000 hours on the fixture side and weighing 210g, the Soren O-BL is a straightforward recessed choice that sits within our wider GU10 downlight range.
Specification
| Power |
max 20W |
| Voltage |
220-240 AC |
| Luminous flux |
30 lm |
| IP rating |
IP20 |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
20,000 hours |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Round |
| Dimensions |
Ø90 × 22 mm |
| Weight |
210 g |
| Material |
Glass |
| Finish |
Silver |
Downloads
Frequently Asked
What size cut-out do I need in the ceiling?
The fitting itself measures Ø90mm across, so cut your ceiling opening to suit that recessed body. Always confirm the cut-out against the supplied installation diagram before drilling, and check there is enough void depth above for the 22mm fixture and the GU10 lamp.
Is a GU10 bulb included?
No, the Soren O-BL takes a separate GU10 (PAR16) lamp of up to 20W, which is not supplied. This lets you pick the brightness, beam angle and colour temperature that suit the room.
Is it dimmable?
The fixture places no restriction on dimming, so whether it dims comes down to the GU10 lamp you fit. Pair a dimmable GU10 with a compatible dimmer switch for adjustable light levels.
How do I clean the downlight?
Wipe the silver glass trim with a soft, dry or slightly damp cloth once the lamp is cool and the power is off. Avoid abrasive pads or harsh solvents so the glass surface and finish stay clear.