Soren L-SR 20W Recessed Square GU10 Downlight Warm White - Silver

The Soren L-SR is a square recessed downlight that drops into a ceiling void and sits flush with the surface for a neat, built-in finish. It takes a single GU10 lamp up to 20W and runs from a standard 220 to 240V AC mains supply. The warm white 3000K tone gives a soft, settled light, and US buyers will recognise the format as a small recessed can light sized for an individual fitting rather than a wide trim. With a luminous flux of 210 lumens it works as one point in a wider lighting layout, where several units are spread across a ceiling to build the overall level.

Designed for indoor rooms such as hallways, landings, kitchens and living spaces, this downlight suits ceilings where a discreet, low-profile fitting is wanted. A single unit covers around 1 m² at general lighting levels, so the right number depends on the room area and the spacing you choose between fittings. The compact 90 by 90mm square face fits comfortably between joists and pairs well with standard ceiling heights, letting you plan an even grid of points across a kitchen run or a hallway ceiling. Being rated IP20, it is for dry interior use only and should be kept clear of bathrooms, porches and any damp or outdoor location.

The body is built from glass with a square profile and a silver finish that reads cleanly against a painted ceiling. It mounts by recessing into the ceiling and accepts a GU10 lamp through the standard twist-and-lock cap, so lamps are straightforward to fit and later replace. The rated lifespan of the fitting is 20,000 hours, and at 250g it is light enough to handle easily during installation. The Soren range includes further downlight options if you want to match several fittings across one space.

Product Specification Sheet

Range Datasheet

What size is the cut-out for this downlight?

The fitting has a square face measuring 90 by 90mm overall, so you will need to cut a square aperture in the ceiling to suit the recessed body. Always check the supplied template against your ceiling before cutting, as the cut-out hole is the opening the fitting drops into and is slightly smaller than the visible trim face.

What bulb does it take and is it included?

It uses a single GU10 lamp rated up to 20W, fitted through the standard twist-and-lock cap. GU10 lamps are widely stocked, which makes replacement simple if you ever need to change the colour temperature or brightness later.

Can this downlight be used in a bathroom or outdoors?

No. It carries an IP20 rating, which means it is suitable for dry indoor rooms only and offers no protection against moisture. Keep it away from bathrooms, showers, porches and any damp or outdoor position.

How do I keep the fitting clean?

Switch off the power and let the lamp cool, then wipe the glass face and silver surround with a soft, dry or slightly damp cloth. Avoid harsh solvents or abrasive cleaners, as these can mark the finish over time.