Description
The Soren is a square recessed LED downlight built around a single GU10 lamp holder, taking a PAR16 spot lamp up to 20W on a 220 to 240V AC supply. It sits flush in the ceiling for a neat, low-profile finish, with a compact 90 by 90mm square trim and a 22mm depth. Buyers searching in the US will know this format as a recessed can light, where the squared aperture suits modern grid and plasterboard ceilings alike. The beam character depends on the GU10 lamp fitted, so the spot tone and spread can be tailored to the room.
This downlight is built for dry interior spaces such as hallways, kitchens, living rooms and bedrooms, where a run of recessed spots gives even, unobtrusive ceiling light. Because the output depends entirely on the GU10 lamp specified, plan the number of fittings around the lamps you choose rather than a fixed figure per unit, spacing them across the ceiling for balanced coverage. The square shape lines up cleanly in a grid, which works well over worktops, along a corridor or framing a seating area. With its IP20 rating it is for indoor positions only, so keep it clear of bathrooms, porches and any damp or outdoor location.
The frame is glass with a silver finish, giving a crisp square aperture that reads well against white or pale ceilings. Mounting is recessed into the ceiling, dropping into a cut-out behind the surface, and the fitting weighs around 250g so it sits comfortably in standard plasterboard. The GU10 lamp is not integrated, which means lamps can be swapped for a different brightness or colour temperature, and dimming follows whichever GU10 lamp and switch are used. Rated for 20,000 hours of lamp service, it is a straightforward recessed spot for everyday interior lighting. Matching square fittings are available across the wider Kanlux range.
Specification
| Power |
max 20W |
| Voltage |
220-240 AC |
| Luminous flux |
25 lm |
| IP rating |
IP20 |
| Mounting |
Recessed Mount In The Ceiling |
| Lifespan |
20,000 hours |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Shape |
Square |
| Dimensions |
90 × 90 × 22 mm |
| Weight |
250 g |
| Material |
Glass |
| Finish |
Silver |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Is the Soren downlight dimmable?
Dimming depends on the GU10 lamp you fit and the dimmer switch on the circuit. Choose a dimmable GU10 lamp paired with a compatible LED dimmer for smooth control. The fitting itself does not restrict dimming.
What cut-out hole does it need?
The Soren has a 90 by 90mm square trim and a 22mm depth, so the cut-out is the square aperture the body drops into behind the ceiling surface. This is distinct from the overall 90mm trim that sits visible on the surface. Always check the cut-out against your ceiling void before installing.
Does it come with a GU10 lamp included?
The Soren takes a GU10 PAR16 lamp rated up to 20W, which lets you pick the brightness and colour temperature to suit the room. Because the lamp is separate, it can be replaced later without changing the fitting. Check the listing to confirm whether a lamp is supplied.
How do I clean the downlight?
Switch off the power and let the lamp cool, then wipe the glass trim with a soft, dry or slightly damp cloth. Avoid harsh solvents or abrasive pads that could mark the silver finish. A gentle wipe keeps the aperture clear and the output bright.