Free Delivery on all orders over £99*

SMD LED Strip 4.8W/m Cool White 5m Reel - Cut To Length

£1099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This SMD LED strip lights a 5 metre flexible reel with spaced SMD diodes, drawing 4.8W per metre for a clean run of cool white light at 4000K. Each metre puts out around 470 lumens, so a full reel gives a continuous, even line that suits accent and outline runs rather than broad room lighting. Known in the US as LED tape light or light strip, it cuts to length at the marked points so you only fit what the job needs. Colour rendering is rated Ra 80, giving a faithful enough finish for shelving, display and under-cabinet detail.

The strip works well as an indoor accent: under kitchen cabinets, along shelf edges, inside display cases, behind a headboard or to outline a stair stringer or cove. Because it is a low, linear source rather than ambient room lighting, judge it on the line of light it draws and the surfaces it grazes, not on floor coverage. With an IP00 rating it is for dry interior locations only, so keep it clear of bathrooms, damp areas and any exposed position. Plan the run so cut points fall sensibly and the driver sits within reach of a mains spur.

Built on a slim 8mm flexible backing, the reel bends around corners and curves to follow most edges and recesses. It runs on 12V DC, so it is not a mains-direct fitting and needs a matching 12V LED driver, supplied separately, sized to the total wattage of the length you install. Rated for 15,000 hours, it cuts only at the marked intervals along the reel, and the adhesive back fixes it to a clean, dry surface. We also stock the IP65 coated version of this strip for damp and sheltered locations where this IP00 reel cannot be used.

Specification
Power 4.8 W/m
Luminous flux 470 lm/m
Efficiency 98 lm/W
Voltage 12V DC
Driver 12V DC LED driver required (sold separately)
IP rating IP00
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 80
Reel length 5 m
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

Does this LED strip need a driver?

Yes. It runs on 12V DC, so it is not wired straight to the mains and needs a matching 12V LED driver, sold separately. Size the driver to the total wattage of the length you fit, allowing 4.8W for every metre used.

Can the strip be cut to length?

Yes, the reel cuts to length at the marked cut points only, so you fit just the run you need. Always cut at the printed marks rather than between them to keep the circuit intact, and seal or insulate any unused free end.

Can I use this strip outdoors or in a bathroom?

No. This reel is rated IP00, which means it is for dry indoor use only. Keep it out of bathrooms, damp areas and any exposed outdoor position. For those locations choose the IP65 coated version of this strip instead.

How do I keep the strip clean?

Wipe the surface with a soft, dry or lightly damp cloth once the strip is switched off and cool. Avoid solvents and abrasive cleaners, which can mark the diodes or lift the adhesive backing, and never let moisture reach an IP00 strip.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This SMD LED strip lights a 5 metre flexible reel with spaced SMD diodes, drawing 4.8W per metre for a clean run of cool white light at 4000K. Each metre puts out around 470 lumens, so a full reel gives a continuous, even line that suits accent and outline runs rather than broad room lighting. Known in the US as LED tape light or light strip, it cuts to length at the marked points so you only fit what the job needs. Colour rendering is rated Ra 80, giving a faithful enough finish for shelving, display and under-cabinet detail.

    The strip works well as an indoor accent: under kitchen cabinets, along shelf edges, inside display cases, behind a headboard or to outline a stair stringer or cove. Because it is a low, linear source rather than ambient room lighting, judge it on the line of light it draws and the surfaces it grazes, not on floor coverage. With an IP00 rating it is for dry interior locations only, so keep it clear of bathrooms, damp areas and any exposed position. Plan the run so cut points fall sensibly and the driver sits within reach of a mains spur.

    Built on a slim 8mm flexible backing, the reel bends around corners and curves to follow most edges and recesses. It runs on 12V DC, so it is not a mains-direct fitting and needs a matching 12V LED driver, supplied separately, sized to the total wattage of the length you install. Rated for 15,000 hours, it cuts only at the marked intervals along the reel, and the adhesive back fixes it to a clean, dry surface. We also stock the IP65 coated version of this strip for damp and sheltered locations where this IP00 reel cannot be used.

    Specification
    Power 4.8 W/m
    Luminous flux 470 lm/m
    Efficiency 98 lm/W
    Voltage 12V DC
    Driver 12V DC LED driver required (sold separately)
    IP rating IP00
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 80
    Reel length 5 m
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    Does this LED strip need a driver?

    Yes. It runs on 12V DC, so it is not wired straight to the mains and needs a matching 12V LED driver, sold separately. Size the driver to the total wattage of the length you fit, allowing 4.8W for every metre used.

    Can the strip be cut to length?

    Yes, the reel cuts to length at the marked cut points only, so you fit just the run you need. Always cut at the printed marks rather than between them to keep the circuit intact, and seal or insulate any unused free end.

    Can I use this strip outdoors or in a bathroom?

    No. This reel is rated IP00, which means it is for dry indoor use only. Keep it out of bathrooms, damp areas and any exposed outdoor position. For those locations choose the IP65 coated version of this strip instead.

    How do I keep the strip clean?

    Wipe the surface with a soft, dry or lightly damp cloth once the strip is switched off and cool. Avoid solvents and abrasive cleaners, which can mark the diodes or lift the adhesive backing, and never let moisture reach an IP00 strip.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.