Description
The Sirvena is a six light pendant that pairs a round black steel ceiling plate with six lengths of natural rope, each finished with a black lampholder. From the centre, the ropes run out to six small black ceiling points before they drop, and knots along the rope give the cables loose loops and turns rather than hanging dead straight. The fitting stands 159cm tall overall with an 18cm diameter. Each holder takes an E27 bulb of up to 28W, and the bulbs are not included, which leaves the choice of shape and warmth to you. It is rated IP20, which settles where it belongs: indoors, in a dry room.
Over a dining table is where this pendant earns its keep: six bare bulbs at staggered heights spread light along the table rather than leaving a single pool in the middle. The natural rope and black metal suit a rustic farmhouse kitchen, an industrial loft or a relaxed dining room with pale wood furniture, and it works well in a living room or a high hallway that needs something with character. Because the bulbs show, the ones you choose shape the whole look; clear amber globe filament bulbs give a warm, vintage glow that suits the rope.
The body is steel in a black finish, which ties in with the black lampholders and sets off the natural rope. There is no switch on the fitting itself; it is switched at the wall, so it works from the light switch you already have. As a mains light that is wired in, it should be installed by a qualified electrician, and the installation instructions are available as a download. It runs on 220-240V, 50/60Hz mains and weighs 2.454KG packed. Before you order, measure from your ceiling to your table top: at 159cm overall, the lowest bulbs need to sit comfortably clear of anyone seated at the table.
Specification
| Overall Height |
159cm |
| Diameter |
18cm |
| Body Material |
Steel |
| Body Colour |
Black |
| Light Source |
E27 (bulb not included) |
| Wattage |
Max 6 x 28W |
| Switch |
None (switched at the wall) |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
2.454KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Is this pendant suitable for a bathroom?
No. It is rated IP20, which means indoors and dry only, so it suits a dining room, kitchen, living room or hallway rather than a bathroom or a garden.
Are bulbs included?
No, the bulbs are not included. Each of the six lampholders takes an E27 bulb of up to 28W.
How tall is the pendant overall?
The fitting stands 159cm tall overall with an 18cm diameter, so check the height of your ceiling against your table before you order.
Does it have its own switch?
No, there is no switch on the fitting itself. It is switched at the wall, so you turn it on and off with the wall switch you already have.
What material is the pendant?
The body is steel in a black finish, paired with six natural rope cables, each ending in a black lampholder.