Simen 90x90 GU10 Recessed Square Spotlight - Black and Gold

The Simen is a recessed square spotlight that takes a single MR16 or PAR16 reflector lamp on a Gx5.3 or GU10 cap, rated up to 10W. It sits flush in the ceiling and pushes a directional beam downward, so the lamp you fit sets the spread and warmth of the light rather than the fitting itself. It runs from either 12V AC or DC through a transformer, or directly from 220-240V mains depending on the lamp chosen. American buyers will recognise this format as a recessed can spotlight, with the square 92 x 92mm aperture giving a crisp, geometric trim in place of the usual round eyeball.

The square shape suits hallways, kitchens and living spaces where several units run in a line or grid to pick out worktops, artwork or a feature wall. Because it is a single-lamp accent fitting rather than ambient room lighting, coverage depends on the reflector lamp and beam angle you specify: a narrow beam throws a tight pool for task or display work, while a wider beam softens the edge for general fill. It is rated IP20, so keep it to dry indoor positions and clear of bathrooms, porches and any damp or exposed location. Several can be grouped to layer light across a room without a bulky surface fixture.

The body is aluminium alloy in a black, gold and black finish, measuring 92 x 92 x 42mm and weighing 144g, so it sits neatly within a standard ceiling void. It recesses into the ceiling and accepts the lamp via the Gx5.3/GU10 cap, with no integrated LED to replace as a unit. To clean it, wipe the trim with a dry or barely damp cloth once the lamp has cooled. This fitting is part of the wider Simen range of recessed spotlights at Niori.

Can this spotlight be used outdoors or in a bathroom?

No. The Simen is rated IP20, which means dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or exposed position, as it offers no protection against moisture or dust.

Is a lamp included with the fitting?

No lamp is supplied. The fitting accepts an MR16 or PAR16 reflector lamp on a Gx5.3 or GU10 cap, rated up to 10W, so you can choose the beam angle and colour temperature to suit the room.

What beam angle does it give?

The beam is set by the reflector lamp you fit rather than the fitting itself. A narrow MR16 gives a tight accent pool for artwork or display, while a wider lamp spreads the light for more general fill.

How do I clean it?

Wait until the lamp has fully cooled, then wipe the square aluminium trim with a dry or lightly damp cloth. Avoid solvents or abrasive cleaners, which can mark the black and gold finish.