Serenade Rectangle Wall Mirror - Bronze Lacquered

The Serenade is a 91 x 66cm rectangular wall mirror set in a stepped bronze lacquered resin frame with a triple moulding profile. The frame measures 2.5cm in depth and uses three recessed bands that create shadow lines around the mirror glass, adding architectural interest without excessive projection from the wall. The bronze lacquer over the resin base gives a metallic finish with subtle tonal variation across the mouldings.

Designed for hallways, living rooms and dining rooms where a vertical mirror is needed above a console table or fireplace, the Serenade suits both portrait and landscape orientations depending on wall space. The 91cm height works in rooms with ceiling heights of 2.4m or above, while the 66cm width fits alcoves and chimney breasts without dominating the wall. The mirror hangs from two D-rings on the back and requires two wall fixings rated for the mirror's 4-5kg weight including frame.

The bronze lacquered finish sits between antique gold and aged copper in tone, providing warmth without the high reflectivity of polished brass. The lacquer coating on the resin protects the finish from handling marks during installation and gives a consistent colour across all four sides of the frame. The triple stepped moulding catches light differently at each band, creating depth that distinguishes the Serenade from flat-profile mirrors in the same size category.

What orientation does the mirror suit?

The 91 x 66cm proportions work in either portrait (vertical) or landscape (horizontal) orientation. Portrait orientation suits hallways and chimney breasts, while landscape works above console tables and sideboards. The D-ring fixings on the back allow either orientation.

How is the frame finished?

The frame is moulded resin coated in a bronze lacquer. This gives the appearance of metallic bronze with a protective lacquer layer that resists fingerprints and handling marks during installation. The finish is applied uniformly across all moulding profiles.

What wall fixings are needed?

The mirror weighs approximately 4-5kg including the frame and hangs from two D-rings on the back. Use two appropriate wall fixings rated for at least 5kg each, spaced to match the D-ring positions. Masonry walls need wall plugs and screws; plasterboard walls need cavity fixings or studs.

Can the mirror be cleaned safely?

Clean the mirror glass with standard glass cleaner or a solution of water and white vinegar applied with a microfibre cloth. For the bronze lacquered frame, wipe with a barely-damp soft cloth and dry immediately. Do not use abrasive cleaners or solvents on the lacquered finish.