Sempra 4I 4 x 10W GU10 Ceiling Spotlight Bar - White

The Sempra 4I is a four-head ceiling light built around four GU10 lamp holders, each taking a max 10W PAR16 lamp for a combined four-point output. It runs on a standard 220-240V AC mains supply and mounts to either the ceiling or the wall, with each head adjustable so the light can be aimed where it is needed rather than fixed in one direction. Often described in the US as a four-light ceiling spotlight bar or flush mount fixture, it gives you separate beams from a single fitting, useful for picking out distinct zones in a room.

The four adjustable heads make this a good fit for kitchens, living rooms and hallways where you want to direct light onto a worktop, seating area or a run of artwork rather than flood the whole space evenly. Because the lamps point independently, coverage depends on how the heads are angled, so it suits rooms where you want layered or task-led light rather than one broad wash. It works well on standard domestic ceiling heights, and the wall-mount option lets you use it as an angled accent fitting above a feature wall. Pair the four GU10 outputs across an open-plan area to mark out cooking, dining and lounging spots from one fixture.

The body is steel with a white finish, keeping it neutral against most ceiling and wall colours, and the fitting weighs around 1.01 kg so it sits comfortably on a standard ceiling rose or wall fixing. It carries an IP20 rating, which means it is for dry indoor use only and should be kept out of bathrooms, porches and any damp or exposed location. The GU10 format lets you choose your own lamps for wattage, colour temperature and dimmability, since dimming depends on the lamps fitted rather than the fixture itself. Other head counts and layouts are available across the Sempra range.

How many lamps does the Sempra 4I take and what type?

It holds four GU10 lamps, each rated up to 10W, in the PAR16 format. The lamps are chosen separately, so you can match wattage and colour temperature to the room. Running all four gives you four directed beams from a single fitting.

Can it be used in a bathroom or outdoors?

No. The Sempra 4I is rated IP20, which means it is suitable for dry indoor rooms only. Keep it clear of bathrooms, porches, carports and any damp or exposed location.

Is this light dimmable?

Dimming depends on the GU10 lamps you fit rather than the fixture itself. If you install dimmable GU10 lamps and pair them with a compatible dimmer switch, the fitting can be dimmed. Check that both the lamps and the dimmer are rated to work together.

How do I clean the fitting?

Switch off the power and let the lamps cool first, then wipe the white steel body and the heads with a soft, dry or slightly damp cloth. Avoid abrasive cleaners or solvents, which can mark the finish. Do not use water around the lamp holders.