SEMPRA 3I Triple GU10 Spotlight Ceiling Light - Black

The SEMPRA 3I is a triple-head ceiling light built around three GU10 lamp holders, each taking up to 10W. Its three adjustable heads let the light be aimed independently, so output can be pointed at a worktop, a reading chair or spread across a wider area. Wired for 220-240V AC mains, it works as an integrated multi-spot fitting rather than a single fixed downward beam. In US terms a fitting like this is closest to a multi-directional flush mount led ceiling light, with the heads doing the work a directional track would otherwise handle.

The three-way adjustability makes the SEMPRA 3I well suited to rooms where light needs to fall in more than one direction, such as a kitchen with a counter and an island, a hallway with a console table, or a home office. Because the heads can be angled, a single fixing point can cover a surprisingly broad spread, with the brightness concentrated wherever each head is aimed. For general rooms it sits comfortably on standard ceiling heights, and its compact triple-bar form keeps it close to the ceiling rather than hanging down. As an IP20 fitting it is for dry indoor rooms only and should be kept clear of bathrooms, porches and any damp or outdoor location.

The SEMPRA 3I is made from steel in a black finish, giving a solid bar-mounted body that holds its angle once each head is set. It carries an IP20 rating for indoor use and can be fitted to a ceiling or a wall depending on the layout, with the heads adjusted to suit either orientation. The three GU10 lamps are user-replaceable, so colour temperature and brightness can be chosen at the bulb and swapped over the life of the fitting. The black SEMPRA sits within a wider range of multi-head and single-head spotlights if a matching layout is needed across a room.

Is the SEMPRA 3I dimmable?

Dimming depends on the GU10 lamps fitted rather than the fixture itself, as the bulbs are not included. Fit dimmable GU10 lamps on a compatible dimmer switch to dim the output. Each of the three heads runs from the same circuit, so they dim together.

What room size does it suit?

With three adjustable GU10 heads each taking up to 10W, it works well in small to medium rooms such as a kitchen area, hallway or home office. Because the heads angle independently, you can spread the light across a wider area or concentrate it on a single task surface. For larger rooms, pair it with additional fittings.

Can the SEMPRA 3I be used outdoors or in a bathroom?

No. It carries an IP20 rating, which means it is for dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or outdoor location, where a higher IP-rated fitting would be required.

How do I clean the SEMPRA 3I?

Switch off the power and let the lamps cool, then wipe the steel heads and bar with a soft dry or barely damp cloth. Avoid solvents and abrasive cleaners, which can mark the black finish. Reposition the heads afterwards if they have been nudged during cleaning.