Sempra 3I 3 x 10W GU10 Ceiling Spotlight - White

The Sempra 3I is a three-head ceiling light that takes three GU10 lamps at up to 10W each, giving a focused, directional output across a single fitting. Each spot can be angled independently, so the light can be aimed where it is wanted rather than spread evenly, making this a flush mount LED ceiling light that doubles as task and accent lighting. Running on 220-240V AC mains, it suits the GU10 PAR16 lamps that are widely stocked, and the colour temperature follows whichever lamps are fitted rather than being locked in.

The three adjustable heads make the Sempra 3I a good fit for kitchens, hallways and home offices where light needs to be pointed at a worktop, a run of cabinets or a desk rather than washing a whole room evenly. Because each lamp throws a defined beam, it works well as layered lighting in living spaces, picking out a reading chair, artwork or an alcove. It mounts to either a ceiling or a wall, so it can sit above a worktop or be turned out from a wall as a directional fitting. For standard room heights the angled heads give useful reach without glare straight down; in lower-ceilinged spaces the spots can be tilted to avoid shining directly into the eye line.

The body is steel in a white finish, keeping the three-head frame neat against a white ceiling. It is rated IP20, so it is built for dry indoor rooms and should be kept out of bathrooms and any damp or outdoor location. The GU10 lamps are user-replaceable rather than integrated, which means lamps can be swapped for a different colour temperature or brightness, and dimming depends on the lamps and switch fitted. The fitting weighs 736g, light enough for a straightforward ceiling or wall fix. The Sempra range includes other head configurations if a different number of spots suits the layout.

How many rooms or what size space does it suit?

With three GU10 lamps at up to 10W each, the Sempra 3I works best as task or accent lighting in medium rooms such as kitchens, hallways and home offices rather than as the sole source for a large open-plan space. Because the heads are adjustable, it is well suited to lighting a specific zone like a worktop or desk. In bigger rooms it pairs well with additional fittings to build up overall levels.

Can I change the colour temperature?

Yes. The Sempra 3I uses replaceable GU10 PAR16 lamps rather than an integrated LED, so the colour temperature is set by whichever lamps you fit. You can choose warm white for living areas or a cooler tone for kitchens and work zones, and swap them later if your preference changes.

Is it dimmable?

Dimming depends on the lamps and the switch you fit, as the GU10 lamps are not supplied. If you want to dim the fitting, choose dimmable GU10 lamps and a compatible dimmer switch. Using standard non-dimmable lamps will mean the light runs at a fixed level.

How do I clean the fitting?

Switch the light off and let the lamps cool, then wipe the steel body and white finish with a soft, dry or lightly damp cloth. Avoid abrasive cleaners or solvents that could mark the finish. As it is rated IP20 for dry indoor use, do not let water run into the fitting or the lamp holders.