Sempra 2I 2 x 10W GU10 Ceiling Spotlight - Black

The Sempra 2I is a twin-head LED ceiling light that takes two GU10 lamps, each rated up to 10W, running on a 220-240V AC mains supply. With two independent heads it sits in the flush mount led ceiling light category familiar to US buyers, while staying compact enough for tighter spots. Each GU10 head can be angled separately, so the pair of PAR16 lamps can be aimed to wash a wall, pick out a feature or simply spread light across a room rather than firing straight down from a single fixed point.

The two adjustable heads make this fitting a good choice for hallways, landings, home offices and smaller living spaces where directional light matters more than a single broad spread. Because the GU10 lamps can be pointed independently, one head can light a work surface or reading chair while the other lifts a darker corner. It works well on standard domestic ceilings, and the twin-head form also suits lower ceilings where a deep pendant would feel cramped. As an IP20 fitting it is rated for dry indoor rooms only, so keep it clear of bathrooms, porches and any damp or exposed location.

The body is steel finished in black, giving a solid feel at a light weight of 534g that keeps mounting straightforward. The fitting can be installed on either a wall or a ceiling, so it can be used as an uplight, a downlight or an angled spot depending on where it is fixed. It uses GU10 lamps rather than an integrated LED, which means each PAR16 lamp can be swapped or upgraded over time, and the lamp choice sets whether the light is dimmable and which colour temperature it runs at. Other heads and single-lamp versions are available across the Sempra range.

How big a room will it light?

With two GU10 heads it is best suited to small and medium rooms such as a hallway, landing, home office or compact living space. Each head can be aimed separately, so it suits directional and accent lighting rather than flooding a large open-plan area. For bigger rooms you would typically pair or run several fittings.

Can it be used outdoors or in a bathroom?

No. The Sempra 2I is rated IP20, which means it is for dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or exposed outdoor location.

Does it use a replaceable bulb or an integrated LED?

It takes two GU10 lamps rather than having an integrated LED, so each lamp can be replaced or upgraded as needed. Each head accepts a PAR16 GU10 rated up to 10W. The lamp you fit also determines the colour temperature and whether the light is dimmable.

How do I clean it?

Switch the fitting off and let the lamps cool, then wipe the black steel body and heads with a soft, dry or barely damp cloth. Avoid abrasive cleaners or solvents, which can mark the finish. Do not let water run into the lamp holders.