SEMPRA 1I GU10 Ceiling Light - White

The SEMPRA 1I is a single-lamp ceiling and wall fitting that takes one GU10 PAR16 lamp rated up to 10W, running on a 220-240V AC mains supply. It gives a directional pool of light from a compact steel head rather than a broad ambient wash, so the output and beam come down to the GU10 lamp you choose. American buyers will recognise the GU10 base as the standard twist-and-lock spotlight cap used on this style of adjustable fixture. The single-head 1I is the smallest configuration in the wider SEMPRA range, suited to picking out one area at a time.

Because it throws a focused beam rather than filling a whole room evenly, the SEMPRA 1I works best as accent or task lighting: marking a hallway, lighting a reading nook, highlighting a picture or shelf, or adding a directional point of light in a kitchen or bedroom. Mounted on the ceiling it suits standard domestic ceiling heights, and the dual rating means it can equally sit on a wall to graze a surface or wash a feature from the side. Coverage is local to the spot you aim it at, so for a fuller room you would group several heads or pair it with other fittings.

The body is steel with a white finish, keeping it neutral against most ceilings and walls. It is rated IP20 for dry indoor use only, so keep it clear of bathrooms, porches and any damp or outdoor location. The fitting mounts directly to a ceiling or wall and accepts a single GU10 lamp, which is not supplied, leaving you free to set the wattage, colour temperature and beam angle to the room. Dimming depends entirely on the GU10 lamp fitted. The SEMPRA range also runs to multi-lamp bar versions if you need more than one head from a single base.

How many lumens does it give and what size room does it suit?

Output depends on the GU10 PAR16 lamp you fit, as the lamp is not included. The fitting takes a single lamp up to 10W, which gives a focused accent or task beam rather than full room lighting. For a larger space, use several heads or combine it with other fixtures.

Is the SEMPRA 1I dimmable?

Dimmability is set by the GU10 lamp you choose rather than the fitting itself. Pair it with a dimmable GU10 lamp on a compatible dimmer switch if you want adjustable output. A non-dimmable lamp will run at a fixed brightness.

Can it be used in a bathroom or outdoors?

No. The SEMPRA 1I is rated IP20, which means dry indoor use only. Keep it out of bathrooms, porches, carports and any damp or outdoor position, as it offers no protection against moisture or water.

How do I clean the fitting?

Switch off the power and let the lamp cool first, then wipe the white steel body with a soft, dry or slightly damp cloth. Avoid abrasive cleaners and solvents, which can mark the finish. Make sure the fitting is fully dry before switching it back on.