Description
A small spotlight in matt black, sized at 80mm across the base and standing just over a hand's width tall. It takes a GU10 lamp, and the reflector type it is designed around throws a defined pool of light rather than a soft wash, so you get direction and contrast instead of a flat glow. The black finish keeps the fitting quiet against a dark ceiling and reads as a deliberate dot against a pale one.
Single spots like this earn their place where you want light aimed at something specific: over a worktop, along a run of shelving, above a reading chair, or picking out artwork in a hallway. We use them in twos and threes at spacing to suit the run, and they sit happily on a ceiling or a wall where a larger fitting would crowd the space. Dimming is possible if you choose a dimmable lamp, with a compatible dimmer on the circuit, which makes them useful in rooms that shift from task light to evening light. It suits flats, low ceilings and any spot where a pendant would be in the way.
The body is finished in a low sheen black that hides fingerprints better than gloss, and the matt surface is best kept with an occasional wipe using a barely damp cloth once the power is off and the lamp has gone cold; avoid solvents and anything abrasive, as scouring will polish the finish unevenly. Its intended home is a dry interior room on a normal household circuit. It carries a one year warranty. The wider Sal range gives you room to repeat the look across a whole scheme, and we stock the recessed version, the round three light plate, the linear bars in two and three light versions and the switched wall light, in matt white as well as this black. Lamps are supplied separately.
Specification
| Colour |
Matt Black |
| Ceiling Mountable |
Yes |
| Wall Mountable |
Yes |
| Weight |
0.20KG |
| Length |
80mm |
| Width |
80mm |
| Height |
128mm |
| Materials Used |
Aluminium, Iron |
| Adjustable Height |
No |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp should I fit?
A GU10 LED reflector lamp of around 50mm diameter, rated no higher than 10W. Lamps are not included, so add them to your order.
Can I dim it?
Yes, provided the lamp you choose is a dimmable type and the circuit has a compatible dimmer. No dimmer is supplied with the fitting.
How big is it?
The base measures 80mm by 80mm and the overall height is 128mm, so it takes up very little visual space on a ceiling or wall.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it right for dry rooms such as kitchens, hallways, living rooms and bedrooms, but not for shower or bath zones.
How do I clean the matt black finish?
Switch off at the wall, let the lamp cool fully, then wipe with a soft cloth just slightly damp with water. Skip cleaning sprays and abrasive pads, which can burnish the matt surface.
Are other finishes available?
Yes, we stock the Sal range in matt white as well as matt black, with satin gold and black on some of the linear versions.