Rounda Ø220 18W Recessed Downlight Warm White - White

The Rounda is a round recessed LED downlight running 18W from a 220-240V AC supply and putting out 1200 lumens at a warm 3000K. A wide 110 degree beam spreads light evenly rather than concentrating it in a tight pool, which makes it well suited to general room lighting. North American buyers will recognise this recessed format as a can light, dropped into the ceiling so the trim sits flush with the surface. With an integrated LED rated at Ra 80 colour rendering, it gives a soft, even wash that holds natural tones across the space.

Measuring Ø220mm with a slim 20mm depth, the Rounda recesses neatly into a ceiling void and suits hallways, landings, bedrooms and smaller living areas. At general lighting levels a single unit covers around 4 m², so a cluster spaced across the ceiling will light a room comfortably. The IP44-rated front means it can also be specified in bathroom zones and under covered, sheltered outdoor spots such as a porch or carport, though it should be kept clear of direct water jets and any fully exposed position. The warm 3000K tone keeps relaxed rooms and circulation areas feeling welcoming.

The body is aluminium alloy in a white finish, weighing 354g, with a round profile that reads cleanly against a plain ceiling. It is a recessed mount fitting designed to drop into the ceiling, and is not dimmable, so it pairs best with a standard switched circuit. The IP44/20 rating protects the visible face against splashes while the rear sits in the dry ceiling void. Rated for 15,000 hours, the integrated LED runs maintenance-free for years. The Rounda range includes further sizes and output options for matching fittings across a project.

Is the Rounda dimmable?

No, this version is not dimmable, so it should be wired to a standard switched circuit rather than a dimmer. Pairing a non-dimmable LED with a dimmer can cause flicker or buzz. If you need dimming, check the wider Rounda range for a compatible option.

What size cut-out does it need?

The fitting has an overall diameter of Ø220mm, so allow a slightly smaller recessed cut-out in the ceiling for the body to drop through and the trim to sit flush. Always confirm the exact cut-out figure on the spec sheet before drilling. The shallow 20mm depth means it fits comfortably into most ceiling voids.

Can I use it in a bathroom?

Yes, the IP44 rating on the visible face suits bathroom zones away from direct spray, as well as covered outdoor spots like a porch. Keep it clear of direct water jets and fully exposed positions. Always observe the relevant bathroom zone regulations for your installation.

How do I clean the downlight?

Wipe the white trim and lens with a soft, dry or barely damp cloth once the fitting is switched off and cool. Avoid abrasive pads or solvents, which can mark the aluminium finish. A gentle wipe now and then keeps the light output bright and the surface clean.