Description
The Roos LED wall light is built from two shapes: a gold disc against the wall and a long cylinder of sandblasted acrylic running through it, which the disc divides into two equal arms. The structure is iron in a gold finish, and the acrylic diffuses the light evenly along its length. The light source is an integrated LED, so there is no bulb to fit or replace. It draws 12W and gives 700 lumens with a 360° beam angle, spreading light all around the cylinder and out into the room. We offer it in two colour temperatures: 2700K for a warmer glow, or 3000K for a slightly crisper warm white. A CRI of 90 or more means colours look true beneath it.
Rated IP20, it is for dry rooms only. We like it in a living room or hallway, either side of a bed instead of bedside lamps, or above a sideboard or console table, where a long horizontal line of light sits well with the furniture beneath. Because light leaves the cylinder in every direction, it washes the wall around it, which suits a landing or corridor. Its clean, modern lines suit contemporary interiors, and the gold finish brings warmth to white, grey or darker painted walls.
The iron structure carries the gold finish, and the sandblasted acrylic gives the cylinder its opaque, frosted look, so it reads as an even glow. It runs on 220-240V mains and is switched simply on and off; it is not dimmable, so it belongs on a standard switch rather than a dimmer. As a mains fitting, it is for a qualified electrician to install, and it carries a 5 year guarantee. For a balanced look, use a pair either side of a hallway mirror or a bed at the same height, so the two lines of light read as one.
Specification
| Finish |
Gold |
| Materials |
Iron structure and sandblasted acrylic |
| Light Source |
Integrated LED |
| Power |
12W |
| Light Output |
700 lumens |
| Colour Temperature |
2700K or 3000K |
| CRI |
≥ 90 |
| Beam Angle |
360° |
| IP Rating |
IP20 |
| Control |
On-off (switched) |
| Voltage |
220-240V |
| Guarantee |
5 years |
| Product Codes |
02657, 03883 |
Frequently Asked
Does it need a bulb?
No. It has an integrated LED built into the fitting, so there is no bulb to fit, and it gives 700 lumens from 12W.
Which colour temperatures can I choose?
It comes in two colour temperatures, 2700K or 3000K. 2700K gives a warmer, cosier light, while 3000K is a slightly crisper warm white.
Can I dim it?
No. It is an on-off switched fitting and is not dimmable, so it should be wired to a standard switch rather than a dimmer.
Can I use it in a bathroom?
No. It is rated IP20, so it is for dry rooms only, such as a living room, hallway or bedroom.
What is it made of?
The structure is iron in a gold finish, and the cylinder is sandblasted acrylic, which diffuses the LED light into a soft, even glow.
How is it installed?
It is a 220-240V mains wall light, so it is for a qualified electrician to install.