Description
The Ring W1 Number is a round wall light from our Ring range: a ring body framing a white front disc that carries a number, so one fitting lights a doorway and marks it at the same time. It is 25cm across, the number disc is 18cm across, and it projects 9cm from the wall, with a ring body 7cm deep. It takes two E14 bulbs, 6W maximum each, sold separately, which give the light, and it is not dimmable, so it suits an ordinary on and off switch.
It suits a bedroom, a dining room or a living room, and it is at its best beside a numbered door along a hallway or landing, where the figure on the disc is easy to read at a glance. With its 9cm projection it sits close to the wall, so it fits a narrow passage without getting in the way. It is rated IP20, so it is for dry rooms only, and it is for indoor use.
The design is by ILMIODESIGN. It comes in each of these finishes, all matt: Aqua (matt) RAL 5024, Black (matt) RAL 7021, Brass (matt), Brown (matt) RAL 8025, Burgundy (matt) RAL 3011, Concrete (matt) RAL 7033, Forest (matt) RAL 6035, Grey (matt) RAL 7037, Horizon (matt) RAL 5023, Khaki (matt) RAL 7008, Lemon (matt) RAL 1018, Limestone (matt) RAL 7035, Mango (matt) RAL 1034, Mustard (matt) RAL 1012, Orange (matt) RAL 2013, Pearl (matt) RAL 1035, Red (matt) RAL 3020, River (matt) RAL 5017, Rose (matt) RAL 3015, Silex (matt) RAL 7032, Terracotta (matt), Turquoise (matt) RAL 6034 and White (matt). It runs on 230V mains power and is wired in by a qualified electrician, and as a Class I fitting it needs an earthed supply. Pick the finish that best suits the door it sits beside, and the number will read clearly each time you pass. After you place your order, email us at sales@niori.co.uk or use our contact page, with your order number and the house number you want on the disc. Our photographs show the red version.
Specification
| Finish |
Aqua (matt) RAL 5024, Black (matt) RAL 7021, Brass (matt), Brown (matt) RAL 8025, Burgundy (matt) RAL 3011, Concrete (matt) RAL 7033, Forest (matt) RAL 6035, Grey (matt) RAL 7037, Horizon (matt) RAL 5023, Khaki (matt) RAL 7008, Lemon (matt) RAL 1018, Limestone (matt) RAL 7035, Mango (matt) RAL 1034, Mustard (matt) RAL 1012, Orange (matt) RAL 2013, Pearl (matt) RAL 1035, Red (matt) RAL 3020, River (matt) RAL 5017, Rose (matt) RAL 3015, Silex (matt) RAL 7032, Terracotta (matt), Turquoise (matt) RAL 6034 & White (matt) |
| Diameter |
25cm |
| Front Number Disc Diameter |
18cm |
| Projection |
9cm |
| Ring Body Depth |
7cm |
| Light Source |
2 x E14 (bulbs not included) |
| Max Bulb Wattage |
6W per bulb |
| Dimmable |
No |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP20 |
| Protection Class |
Class I |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
What bulbs does the Ring W1 Number take?
It takes two E14 bulbs with a maximum of 6W each. The bulbs are not included, so you will need to buy two separately.
Can the Ring W1 Number be dimmed?
No. This wall light is not dimmable, so it is best run from an ordinary on and off switch rather than a dimmer.
Is it suitable for damp rooms?
No. It is rated IP20, so it is for dry rooms only, such as a bedroom, living room or hallway.
How big is the Ring W1 Number wall light?
It is 25cm across, with an 18cm number disc on the front, and it projects 9cm from the wall with a ring body 7cm deep.
How is it installed?
It runs on 230V mains power and is wired in by a qualified electrician. It is a Class I fitting, so it needs an earthed supply.
How do I choose the number on the disc?
After you place your order, email us at sales@niori.co.uk or use our contact page, with your order number and the house number you want on the disc.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.