Free Delivery on all orders over £99*

RGBW LED Strip Flex Link 135mm Solderless Connector - 5 Pack

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The LYYT RGBW flex link is a 135mm solderless connector cable for joining sections of 12mm RGBW LED strip tape. Each link carries five cores (black, green, red, blue, white) and terminates in snap-fit connectors at both ends, allowing two pieces of LED tape to be joined without soldering or specialist tools. The cable fits into the gap between tape sections when running round corners, bridging obstacles, or extending a run across a non-lit section.

Designed for residential accent lighting, retail display installations, hospitality fitouts and bar/club environments where RGBW LED tape needs to navigate corners or gaps. The 135mm length gives enough slack to turn a 90-degree corner on wall-mounted tape or to route the cable behind a coving or architrave. The IP20 rating limits the connector to dry indoor use — it cannot be used in bathrooms, kitchens near sinks, or outdoors.

Each connector aligns with the contact pads on the LED tape and clips into place with finger pressure, holding securely without adhesive or screws. The 5-core design maintains separate channels for red, green, blue and white LEDs plus a common negative, allowing full RGBW colour mixing to continue across the joint. The pack contains five links, giving enough connectors to handle a typical room installation with multiple corners or sections.

Specification
IP rating IP20
Tape version 12mm RGBW
Cores 5 (black, green, red, blue, white)
Wire length 13.5cm
Dimensions 17 x 1.5 x 0.5 cm
Weight 0.03kg
Frequently Asked

Do these connectors work with RGB tape or only RGBW?

These are 5-core connectors designed for RGBW tape (red, green, blue, white plus common negative). They will not work with standard RGB tape, which uses a 4-core configuration. Use the dedicated RGB flex links for standard RGB tape.

Can these be used outdoors or in bathrooms?

No. The IP20 rating means the connectors are not protected against moisture. Use them only in dry indoor locations away from sinks, showers, and exterior installations.

How do the snap connectors attach to the LED tape?

Align the connector with the contact pads on the cut end of the LED tape, ensuring the colour markings on the connector match the tape's polarity. Press the connector down until it clicks into place. No soldering or tools are needed.

What's the maximum voltage these can handle?

The specification does not state a maximum voltage, but RGBW LED tape typically runs on 12V or 24V DC. Confirm compatibility with your specific tape and power supply before installation.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The LYYT RGBW flex link is a 135mm solderless connector cable for joining sections of 12mm RGBW LED strip tape. Each link carries five cores (black, green, red, blue, white) and terminates in snap-fit connectors at both ends, allowing two pieces of LED tape to be joined without soldering or specialist tools. The cable fits into the gap between tape sections when running round corners, bridging obstacles, or extending a run across a non-lit section.

    Designed for residential accent lighting, retail display installations, hospitality fitouts and bar/club environments where RGBW LED tape needs to navigate corners or gaps. The 135mm length gives enough slack to turn a 90-degree corner on wall-mounted tape or to route the cable behind a coving or architrave. The IP20 rating limits the connector to dry indoor use — it cannot be used in bathrooms, kitchens near sinks, or outdoors.

    Each connector aligns with the contact pads on the LED tape and clips into place with finger pressure, holding securely without adhesive or screws. The 5-core design maintains separate channels for red, green, blue and white LEDs plus a common negative, allowing full RGBW colour mixing to continue across the joint. The pack contains five links, giving enough connectors to handle a typical room installation with multiple corners or sections.

    Specification
    IP rating IP20
    Tape version 12mm RGBW
    Cores 5 (black, green, red, blue, white)
    Wire length 13.5cm
    Dimensions 17 x 1.5 x 0.5 cm
    Weight 0.03kg
    Frequently Asked

    Do these connectors work with RGB tape or only RGBW?

    These are 5-core connectors designed for RGBW tape (red, green, blue, white plus common negative). They will not work with standard RGB tape, which uses a 4-core configuration. Use the dedicated RGB flex links for standard RGB tape.

    Can these be used outdoors or in bathrooms?

    No. The IP20 rating means the connectors are not protected against moisture. Use them only in dry indoor locations away from sinks, showers, and exterior installations.

    How do the snap connectors attach to the LED tape?

    Align the connector with the contact pads on the cut end of the LED tape, ensuring the colour markings on the connector match the tape's polarity. Press the connector down until it clicks into place. No soldering or tools are needed.

    What's the maximum voltage these can handle?

    The specification does not state a maximum voltage, but RGBW LED tape typically runs on 12V or 24V DC. Confirm compatibility with your specific tape and power supply before installation.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.