Description
The Relvena is a steel floor lamp in a bronze finish, built around a slim upright stem that curves over at the top into a short arm. From that arm hangs a wide, softly curved metal shade cut through with a leaf pattern, set off to one side of the stem so it reaches out over the space beside it. It stands 159.5cm tall, measures 51cm long and 40cm wide, and rests on a round base 23cm in diameter. It takes a single E27 bulb of up to 60W, bought separately because the bulb is not included. With an IP20 rating it belongs indoors in dry rooms, exactly where a reading lamp is wanted.
Because the shade reaches out from the stem, the lamp sits comfortably beside an armchair or the end of a sofa, putting light where you read or talk while the round base stays neatly out of the way. Its slim profile takes up very little floor space, so it suits a living room corner, a bedroom or a study where a table lamp would crowd the surface. The leaf cut-outs let light through the shade itself, and the pattern works as decoration even while the bulb is unlit. Bronze sits happily with warm woods, soft greys and natural textures, so it settles into most rooms without fuss.
The body is steel, a strong, rigid material that keeps a slim stem and arm steady, finished in bronze. A foot switch lets you turn the lamp on and off with a tap of the toe, so there is no need to bend down or reach under the shade. It runs on 220-240V, 50/60Hz, and has a packed weight of 2.612KG. Because the bulb stays visible beneath the shade, a decorative E27 bulb of no more than 60W is worth choosing, and the installation instructions are available as a download to keep with the lamp.
Specification
| Length |
51cm |
| Width |
40cm |
| Height |
159.5cm |
| Base Diameter |
23cm |
| Body Material |
Steel |
| Body Colour |
Bronze |
| Light Source |
E27 (bulb not included) |
| Wattage |
Max 60W |
| Switch |
Foot switch |
| IP Rating |
IP20 |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Weight (packed) |
2.612KG |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Relvena floor lamp go in a bathroom or outdoors?
No. It is rated IP20, which means it is made for dry indoor rooms such as living rooms, bedrooms and studies, away from water.
Which bulb does it take?
It takes one E27 bulb of up to 60W. The bulb is not included, and a decorative bulb is a good choice because it stays visible beneath the shade.
How tall is the lamp?
It stands 159.5cm tall, measures 51cm long and 40cm wide, and sits on a round base 23cm in diameter.
What kind of switch does it have?
It has a foot switch, so you can turn the lamp on or off with your foot without bending down or reaching under the shade.
What material and finish is the lamp?
The body is steel in a bronze finish, which pairs well with warm woods, soft greys and natural textures in a living room or bedroom.