Free Delivery on all orders over £99*

Reflector for 58W 5ft T8 Batten - White Steel 1500mm

£1099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This white steel reflector fits 58W 5ft T8 fluorescent battens, measuring 1500mm long by 150mm wide with a 45° projection angle. The white powder-coated finish maximises reflectivity, redirecting light downward and outward from the tube rather than allowing it to be absorbed by the ceiling or batten housing.

Designed for warehouses, workshops, garages and commercial utility areas where ceiling-mounted T8 battens provide the primary lighting, the reflector clips or screws onto compatible batten fittings without requiring rewiring. The 45° angle projects light forward and down, reducing the number of fittings needed to achieve equivalent lux levels at floor or worktop height. This makes it a cost-effective retrofit when upgrading older commercial lighting or when repositioning work areas under existing battens.

The steel construction withstands vibration, temperature fluctuation and the occasional knock that comes with industrial environments. The white finish maintains reflectivity over time without yellowing, unlike some painted or plastic reflector materials. The 1500mm length matches the full span of a 5ft T8 tube, ensuring the entire lamp output benefits from the reflector rather than just a central section.

Specification
Length 1500mm
Width 150mm
Projection 45°
Construction Steel
Finish White
Downloads

Product Specification Sheet

Frequently Asked

Which batten fittings does this reflector fit?

The reflector is designed for 5ft T8 battens with a 58W tube rating. Compatibility depends on the batten housing design — most open or semi-recessed 5ft battens accept this size reflector, but check the batten's width and mounting points before ordering.

How much does it improve light output?

Reflectors typically increase effective light output at working height by 20-40% compared to the same batten without a reflector, by redirecting upward and sideways light downward. The exact gain depends on ceiling colour, mounting height and room geometry.

Can it be fitted to an existing batten without rewiring?

Yes. The reflector attaches to the batten housing via clips or screws depending on the batten model, and does not require any electrical work. The tube and ballast remain in place during fitting.

Does it work with LED replacement tubes?

Yes, if the LED tube is a direct T8 replacement in a 5ft size. The reflector improves light distribution regardless of whether the tube is fluorescent or LED, as long as the tube diameter and length match the reflector profile.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This white steel reflector fits 58W 5ft T8 fluorescent battens, measuring 1500mm long by 150mm wide with a 45° projection angle. The white powder-coated finish maximises reflectivity, redirecting light downward and outward from the tube rather than allowing it to be absorbed by the ceiling or batten housing.

    Designed for warehouses, workshops, garages and commercial utility areas where ceiling-mounted T8 battens provide the primary lighting, the reflector clips or screws onto compatible batten fittings without requiring rewiring. The 45° angle projects light forward and down, reducing the number of fittings needed to achieve equivalent lux levels at floor or worktop height. This makes it a cost-effective retrofit when upgrading older commercial lighting or when repositioning work areas under existing battens.

    The steel construction withstands vibration, temperature fluctuation and the occasional knock that comes with industrial environments. The white finish maintains reflectivity over time without yellowing, unlike some painted or plastic reflector materials. The 1500mm length matches the full span of a 5ft T8 tube, ensuring the entire lamp output benefits from the reflector rather than just a central section.

    Specification
    Length 1500mm
    Width 150mm
    Projection 45°
    Construction Steel
    Finish White
    Downloads

    Product Specification Sheet

    Frequently Asked

    Which batten fittings does this reflector fit?

    The reflector is designed for 5ft T8 battens with a 58W tube rating. Compatibility depends on the batten housing design — most open or semi-recessed 5ft battens accept this size reflector, but check the batten's width and mounting points before ordering.

    How much does it improve light output?

    Reflectors typically increase effective light output at working height by 20-40% compared to the same batten without a reflector, by redirecting upward and sideways light downward. The exact gain depends on ceiling colour, mounting height and room geometry.

    Can it be fitted to an existing batten without rewiring?

    Yes. The reflector attaches to the batten housing via clips or screws depending on the batten model, and does not require any electrical work. The tube and ballast remain in place during fitting.

    Does it work with LED replacement tubes?

    Yes, if the LED tube is a direct T8 replacement in a 5ft size. The reflector improves light distribution regardless of whether the tube is fluorescent or LED, as long as the tube diameter and length match the reflector profile.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.