Description
The Radiantix is a 22cm outdoor bollard light built from turned aluminium with a grey powder-coated finish and an opal plastic diffuser. The cylindrical body narrows at its centre, creating an hourglass profile that directs light both upward and downward from a single E27 bulb fitting (bulb sold separately). The IP44 rating protects against rain and dust, making the bollard suitable for year-round outdoor installation.
Designed for pathway edging, driveway borders, and low-level garden bed accents, the 22cm height keeps the light source below knee level, minimising glare while marking routes and boundaries. The grey finish sits neutrally against paving, gravel, planted beds and decking without competing visually with surrounding materials. The 140mm diameter footprint fits tightly spaced installations along narrow paths or between plants.
The opal diffuser spreads the bulb's output evenly in a 360-degree arc, providing soft ambient light rather than a focused beam. The aluminium construction resists corrosion in coastal and high-moisture environments, and the powder coat holds its colour under UV exposure better than painted finishes. The bollard is dimmable when paired with a compatible dimmer and dimmable E27 LED bulb, allowing light levels to be adjusted for evening entertaining or late-night security lighting.
Specification
| Diameter (mm) |
140 |
| Dimmable |
Yes |
| Number Of Bulbs |
1 |
| Bulb Type |
E27 |
| IP Rating |
IP44 |
| Warranty |
5 Years |
Frequently Asked
What bulb does the Radiantix take?
The bollard takes a standard E27 (Edison screw) bulb. Bulbs are sold separately. Most users pair this with a 6-10W warm-white LED rated for outdoor use, which provides enough light for pathway marking without excessive brightness.
Can it be used in exposed coastal locations?
The IP44 rating protects against rain and dust, and the aluminium construction resists corrosion in coastal environments. The powder-coated finish holds up better to salt spray than painted aluminium, though regular rinsing with fresh water extends the finish life in high-salt areas.
How is the bollard installed?
The Radiantix requires hard-wiring to mains power via an outdoor-rated cable, typically buried in conduit beneath the ground. Installation should be carried out by a qualified electrician familiar with outdoor lighting circuits and IP-rated junction boxes.
Is it dimmable?
Yes, the bollard is dimmable when used with a compatible dimmer switch and a dimmable E27 LED bulb. Check that both the dimmer and bulb are rated for outdoor use and compatible with each other before installation.