Description
The Prosena is a tripod floor lamp with three slim black steel legs and a round shade woven from white strips held in a black frame. The shade combines fabric and wood, and up close the white strips show a fine woven texture against the crisp black edging. It stands 143cm tall, the shade is 40cm across, and the legs spread to 66.5cm at the base. It takes an E27 bulb, which is not included, and carries an IP20 rating, so it belongs indoors in a dry room.
We see it working best in a living room corner beside a sofa or armchair, or in a bedroom where a ceiling light alone feels too flat. Because the weave is open, light escapes through the gaps between the strips, giving a patterned look once the bulb is lit. The black legs and frame give it a clean, graphic outline that sits well with a monochrome scheme, and the white strips keep it light enough for a room full of wood and natural tones. Allow for the tripod's footprint when you plan the space, since the legs spread to 66.5cm and need a clear patch of floor.
The body is black steel, and at 1.99KG the lamp is easy to lift and move between rooms whenever you rearrange the furniture. A foot switch controls the light, so there is no reaching under the shade to find a switch. It runs on 220-240V, 50/60Hz mains power. One practical note: the bulb is not included, so have an E27 bulb ready when you unpack it, and keep the installation instructions, which come as a download, close at hand.
Specification
| Body Material |
Steel |
| Body Colour |
Black |
| Shade Material |
Fabric, Wood |
| Shade Colour |
White & Black |
| IP Rating |
IP20 |
| Light Source |
E27 (bulb not included) |
| Height |
143cm |
| Diameter |
40cm |
| Base Diameter |
66.5cm |
| Weight |
1.99KG |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Operating Voltage |
220-240V, 50/60Hz |
| Switch |
Foot switch |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Prosena floor lamp go in a bathroom or outdoors?
No. It carries an IP20 rating, so it is made for indoor use in dry rooms such as a living room, bedroom or study, away from water.
Which bulb does this floor lamp take?
It takes an E27 screw bulb, and the bulb is not included, so you will need to buy one separately before first use.
How tall is the lamp?
It stands 143cm tall, the shade is 40cm across, and the tripod legs spread to 66.5cm at the base, so leave a clear patch of floor.
How is the lamp switched?
A foot switch controls it, so you can turn the light on or off with your foot instead of reaching under the shade.
What materials are the base and shade?
The tripod body is black steel, and the shade combines fabric and wood, with white strips woven through a black frame for a monochrome look.
How heavy is the floor lamp?
It weighs 1.99KG, which makes it easy to lift and move from a living room corner to a bedroom whenever you fancy a change.