Description
The Post-It is a slim rectangular fitting for an outside wall that throws a single soft wash downward over the surface below. It sits almost flush, standing just 15mm proud, so by day it reads as a neat upright bar and after dark it grazes the render or brickwork with a gentle pool of warmth rather than a hard beam. An integrated source hides behind a clear diffuser, giving an even glow with no glare toward the eye.
This is the coffee version, an 80mm square plate in a deep brown tone that settles against brick, timber cladding or natural stone without drawing the eye. The compact downward format suits a front door, a porch, a garden boundary or a run spaced along a path, where a low welcoming glow close to the surface is the aim. Its warm 3000K output keeps masonry and wood true after dark.
The body is solid powder-coated aluminium with a clear polycarbonate diffuser, sealed to IP65 against dust and water jets for exposed outdoor use, and rated insulation class III on a safe 12V supply. An integrated OSRAM LED gives 310 lumens at 3000K with a colour rendering index above 90 and a life of 50,000 hours, so there is nothing to change. It draws 3W and runs from a remote driver, supplied separately and wired back to the mains.
Specification
| Number of lights |
1 |
| Light source |
Integrated LED, 3W total (310lm, 3000K, CRI>90, 50,000h, OSRAM SMD, non-replaceable) |
| Colour temperature |
3000K (warm white) |
| Width |
80mm |
| Height |
80mm |
| Projection |
15mm |
| Emission |
Direct (downward wash) |
| IP rating |
IP65 (outdoor, dust and water-jet resistant) |
| Dimmable |
No |
| Driver |
Remote 12V driver required, supplied separately |
| Frame / Structure finish |
Coffee-brown powder-coated aluminium |
| Diffuser / Glass |
Clear polycarbonate diffuser |
| Materials |
Solid powder-coated aluminium body, polycarbonate diffuser |
Downloads
Datasheet
Assembly Instructions
3D Model
Frequently Asked
What kind of light does the Post-It give?
A single soft wash aimed downward from an integrated LED at a warm 3000K. A clear diffuser spreads the output evenly over the wall below, so it grazes the surface with a gentle pool of light rather than a sharp beam or a wide flood.
Does it need a bulb?
No. The LED is built into the fitting and cannot be replaced, giving 310 lumens for around 50,000 hours. It runs on a low-voltage 12V supply from a remote driver, which is wired back to the mains and supplied separately from the light.
Can it be used outdoors?
Yes. It is sealed to IP65 against dust and water jets and carries a five-year warranty, so it suits an exposed front door, porch or garden wall. As with any mains outdoor fitting it should be wired by a qualified electrician.
How big is it and where does it suit?
It is a compact 80mm square that stands just 15mm proud. The downward wash suits a front door, a porch, a garden boundary or a row spaced along a path, where a low welcoming glow close to the surface works better than a bright flood.