Description
The Orivelle is a 1000mm vertical wall light built around a curved panel of natural Spanish alabaster, capped at top and bottom with rounded brushed bronze end pieces. An integrated 3000K LED runs the length of the fitting behind the stone, lighting the alabaster from within so the panel itself becomes the source. The fitting measures 120mm wide and projects 80mm from the wall.
Designed as architectural wall lighting for hallways, stairwells, en-suites and bedside positions, the Orivelle suits installations where a tall, slender light is needed to add vertical proportion alongside doorways, mirrors or beds. The 1m height pairs well with rooms of 2.4m ceilings or higher, and a matched pair flanking a mirror or bedhead reads as a deliberate architectural detail rather than a single accent.
The alabaster panel is cut from natural Spanish stone, so each light shows different mineral veining, tonal banding and translucency. The rounded bronze caps soften the otherwise rectilinear silhouette and pick up adjacent metalwork in warm-toned interiors. Junctions between stone and metal are clean, with no visible fixings on the front face, and the brushed bronze finish reduces glare from the LED edge.
Specification
| Material |
Brass & Natural Spanish Alabaster |
| Finish |
Soft White & Brushed Bronze |
| Height |
1000mm |
| Width |
120mm |
| Projection |
80mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Voltage |
230V |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
Is the Orivelle suitable for bathrooms?
No IP rating is specified for this fitting, so it is intended for dry indoor locations such as hallways, bedrooms, living rooms and stairwells rather than bathroom zones. For bathroom wall lighting, choose a fitting with an explicit IP44 or higher rating.
Does the alabaster vary between pieces?
Yes. Each panel is cut from natural Spanish alabaster, so veining patterns, tonal banding and translucency differ between individual lights. This is a feature of the natural stone and not a defect. Pairs are not perfectly matched.
Is the integrated LED replaceable?
The LED is integrated into the fitting and rated for the long service life typical of LED modules. It is not user-replaceable in the way a bulb would be. The fitting carries a 2-year warranty.
How is the alabaster cleaned?
Alabaster is porous and softer than marble. Wipe the panel gently with a dry, soft microfibre cloth. Avoid water, household sprays, polishes and chemical cleaners, which can mark or etch the stone surface.