Oakley LED Flush Ceiling Light 40W 3000K - Polished Chrome

The Oakley is a 750mm flush ceiling light built around a curved polycarbonate ring diffuser with an integrated 40W LED, set within a polished chrome oval frame. The LED sits behind the frosted white polycarbonate, casting 3200 lumens of warm 3000K light both upwards and outwards through the curved ring. The chrome frame reflects ambient light from the room, reinforcing the floating appearance of the illuminated ring.

Designed for rooms with ceiling heights between 2.3m and 2.7m where pendants would sit too low, the Oakley provides both ambient and architectural lighting. The 100mm projection from the ceiling keeps the fitting within typical door clearance, while the 750mm width gives enough presence to work as a primary light source in living rooms, bedrooms and hallways up to 20m². The oval footprint suits rectangular rooms better than circular flush fittings, aligning naturally with the proportions of most UK residential spaces.

The polycarbonate diffuser is impact-resistant and lighter than glass equivalents, making the 4.3kg total weight manageable for standard UK ceiling fixings. The frosted finish diffuses the LED evenly around the ring, avoiding visible hotspots or unlit sections. The polished chrome frame provides a mirror finish that pairs with chrome door furniture, radiators and kitchen appliances in contemporary and minimalist interiors. The non-dimmable integrated LED eliminates bulb replacement for the expected lifespan of the fitting.

Is the Oakley dimmable?

No. The integrated LED is non-dimmable and operates at full 40W output when switched on. If dimming is required, consider a different fitting with dimmable LED compatibility.

What room size does the 3200lm output suit?

3200 lumens at 3000K provides adequate ambient light for rooms up to approximately 20m² (e.g. a 4m x 5m living room or bedroom). For larger spaces or task-heavy rooms like kitchens, additional lighting may be needed.

Can the LED be replaced when it fails?

The LED is integrated into the fitting and is not user-replaceable. LED lifespan is typically 25,000-50,000 hours depending on usage. At 4 hours per day, this equates to 17-34 years before the light output degrades noticeably.

What ceiling fixing is required for the 4.3kg weight?

The fitting should be mounted to a ceiling joist or ceiling rose fixed into a solid substrate. Standard UK plasterboard fixings rated for 5kg+ are acceptable if a joist cannot be located. Installation should follow Part P building regulations and be carried out by a qualified electrician.