Description
The Nut B/90 is an LED bollard light for the garden, standing 90cm tall above the ground on a slim square post. Near the top, a single rounded cup head sits to one side of the post with its opening facing down, so its light falls onto the ground and planting around it. The head is 10cm across and the fitting projects 17.5cm. The light source is an integrated LED, so there is no bulb to buy or change: 6.3W giving 374 lumens at 2700K, a warm white, with a CRI of 90 so leaves, flowers and stone keep their true colours after dark. It comes in Textured Graphite Brown, a dark, earthy finish that sits quietly among foliage.
Rated IP65, this outdoor bollard is made for life in the garden: lining a path, marking the edge of a lawn or picking out a border of grasses and shrubs. At 90cm it brings light to a walkway at a comfortable height while staying low enough to sit among planting. It suits anyone who wants to use the garden after sunset, finding the way to a gate or a bench without lighting the whole space like a floodlight. It is TRIAC dimmable, so with a compatible dimmer you can turn it down for a quieter evening outside. Set several along a drive or a path for a steady line of light.
It is made from stainless steel, aluminium and PA12, with the Textured Graphite Brown finish over the post and head. It stands on a round base plate, with a 12cm anchor below ground. The design is by Estudi Manel Molina. It runs on 230V mains and carries Protection Class II. Because it is wired in to the mains rather than plugged in, it is a job for a qualified electrician to install, and once it is in, there is no bulb to replace.
Specification
| Finish |
Textured Graphite Brown |
| Material |
Stainless steel, Aluminium & PA12 |
| Projection |
17.5cm |
| Length |
11.6cm |
| Head Diameter |
10cm |
| Height Above Ground |
90cm |
| Below-ground Anchor |
12cm |
| Light Source |
Integrated LED |
| LED Power |
6.3W |
| Luminous Flux |
374lm |
| Colour Temperature |
2700K |
| CRI |
90 |
| Dimmable |
Yes (TRIAC) |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP65 |
| Protection Class |
Class II |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
Can the Nut B/90 bollard light stay outside all year?
Yes. It is rated IP65 and made for outdoor use, so it suits garden paths, lawn edges and borders through every season.
Does this bollard light need a bulb?
No. The light source is an integrated LED of 6.3W, giving 374 lumens at a warm 2700K with a CRI of 90, so there is no bulb to buy.
Can I dim the Nut B/90?
Yes. It is TRIAC dimmable, so you can turn it up or down with a compatible dimmer on the circuit that feeds it.
How tall is the Nut B/90 bollard?
It stands 90cm above the ground, with a 12cm anchor below ground. The head is 10cm across and the fitting projects 17.5cm.
How is the Nut B/90 powered?
It runs on 230V mains and is wired in rather than plugged in, so it should be installed by a qualified electrician.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.