Description
The Nut B/90/2L is a two-light LED bollard light from our Nut range, with two cup-shaped heads set at different heights on a slim square post. It stands 90cm tall above the ground, the two heads span 30cm across, and each head is 10cm in diameter. The light source is integrated LED, so there is no bulb to buy or change: 12.6W giving 757lm at 2700K, a warm white, with a CRI of 90 so planting, brick and paving keep their natural colours after dark. The finish is Textured Graphite Brown, a dark, earthy tone that sits quietly among shrubs and stone.
Rated IP65, this bollard light is made for outdoor use and suits the garden well. Set it along a path, at the edge of a lawn, beside a border or at the approach to a front door, where its two heads at different heights give it a more sculptural look than a plain post. At 90cm tall it marks the way at a comfortable height without towering over low planting, and a few placed along a drive or terrace keep the lighting consistent from one end to the other. It is TRIAC dimmable, so on a compatible dimmer you can bring it down to a soft glow for a quiet evening outside.
It is made from stainless steel, aluminium and PA12, in the Textured Graphite Brown finish. The design is by Estudi Manel Molina. Below its 90cm height above the ground, a 12cm anchor goes into the ground to hold the post firm. It is a Class II fitting running on 230V mains and is wired in to the mains by an electrician, so a qualified electrician should install it. Once it is in, there is no bulb to change in either head, which keeps things simple for a path you walk every evening.
Specification
| Finish |
Textured Graphite Brown |
| Material |
Stainless steel, Aluminium & PA12 |
| Head Span |
30cm |
| Length |
11.6cm |
| Head Diameter |
10cm |
| Height Above Ground |
90cm |
| Below-ground Anchor |
12cm |
| Light Source |
Integrated LED |
| LED Power |
12.6W |
| Luminous Flux |
757lm |
| Colour Temperature |
2700K |
| CRI |
90 |
| Dimmable |
Yes (TRIAC) |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP65 |
| Protection Class |
Class II |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
Can the Nut B/90/2L bollard light stay outside all year?
Yes. It is rated IP65 and made for outdoor use, so it suits gardens, paths, borders, driveways and the approach to a front door.
Does this bollard light need bulbs?
No. Both heads use integrated LED, 12.6W in total giving 757lm at 2700K, a warm white, with a CRI of 90.
Is the Nut B/90/2L dimmable?
Yes. It is TRIAC dimmable, so with a compatible dimmer on its circuit you can turn it down to a softer glow in the evening.
How tall is it and how big are the heads?
It stands 90cm tall above the ground, with a further 12cm anchor below ground. The two heads span 30cm across and each is 10cm in diameter.
How is the bollard light powered?
It runs on 230V mains and is wired in to the mains by an electrician, so a qualified electrician should install it.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.