Description
The Nut B/60 is a garden bollard light from our Nut range: a slim square post with one bell-shaped head set to the side of it, finished in Textured Graphite Brown. It stands 60cm above the ground, the head is 10cm across, and the whole light projects 17.5cm. The light source is an integrated LED, so there is no bulb to buy or change. It draws 6.3W and gives 374 lumens of warm 2700K light with a CRI of 90, so planting, stone and paving keep their true colours after dark. The head opens downward, casting its light onto the ground around the post.
Rated IP65, it is made for outdoor use and suits a garden all year round: along a path, at the edge of a border, beside a lawn or by a gate, where a low pool of light helps you find your way without lighting the whole garden. The dark textured finish sits quietly among shrubs and grasses by day, so the post reads as part of the planting. It is TRIAC dimmable, so with a compatible dimmer you can turn it down for a softer glow on a summer evening or keep it brighter near the house. It runs on 230V mains and is wired in by a qualified electrician.
The body is made from stainless steel, aluminium and PA12, and the Textured Graphite Brown finish has a fine grain that sits well beside stone, timber and brick. It is a Class II fitting, and the design is by Estudi Manel Molina. Below ground it has a 12cm anchor, in addition to the 60cm that stands above it. As a practical note, it is worth settling where each bollard will stand while the beds and paths are still being planned, so the wiring can reach it before the planting goes in.
Specification
| Finish |
Textured Graphite Brown |
| Material |
Stainless steel, Aluminium & PA12 |
| Projection |
17.5cm |
| Length |
11.6cm |
| Head Diameter |
10cm |
| Height Above Ground |
60cm |
| Below-ground Anchor |
12cm |
| Light Source |
Integrated LED |
| LED Power |
6.3W |
| Luminous Flux |
374lm |
| Colour Temperature |
2700K |
| CRI |
90 |
| Dimmable |
Yes (TRIAC) |
| Power |
Mains, wired in by an electrician |
| Voltage |
230V |
| IP Rating |
IP65 |
| Protection Class |
Class II |
| Lead time |
Made to order, usually delivered in 4 to 8 weeks |
Frequently Asked
Can the Nut B/60 bollard light go outdoors?
Yes. It is rated IP65 and made for outdoor use, so it suits a garden path, a border or the edge of a lawn all year round.
Does this bollard light need a bulb?
No. It has an integrated LED drawing 6.3W, giving 374 lumens of warm 2700K light with a CRI of 90, so there is no bulb to buy.
Is the Nut B/60 dimmable?
Yes. It is TRIAC dimmable and works with a compatible dimmer, so you can set a softer or brighter level of light in the garden.
How tall is the bollard?
It stands 60cm above the ground, with a 12cm anchor below ground. The bell-shaped head is 10cm across and the whole light projects 17.5cm.
How is the bollard powered?
It runs on 230V mains and is wired in by a qualified electrician rather than plugged into a socket. It is a Class II fitting.
How long will it take to arrive?
It is made to order for you, so it is usually delivered in 4 to 8 weeks.