Description
The NAVI DS10 is a compact round downlight that recesses into the ceiling for a clean, low-profile finish. It takes a single MR16 lamp on a GX5.3 cap and runs at 12V (12 AC or 12 DC), with a power draw of up to 10W. Buyers in the US will recognise the recessed format as a small can light, the fitting dropping flush into the ceiling so only the trim shows. The lamp itself is not included, which lets you pick the exact brightness, beam angle and colour temperature to suit the room.
The NAVI DS10 suits hallways, landings, kitchens and living spaces where a discreet point of light is wanted, and it works well in groups to wash a ceiling evenly. Because the brightness depends on the MR16 lamp you fit, plan the spacing around that bulb's output and beam rather than a fixed figure. Its small Ø75mm face makes it a tidy choice for closely spaced runs over a worktop or along a corridor. The fitting is rated IP20, so keep it to dry indoor rooms and clear of bathrooms or any damp or outdoor location.
Built from aluminium alloy, the NAVI DS10 measures Ø75 x 26mm and weighs just 46g, so it sits neatly within shallow ceiling voids. It runs on a 12V supply, so a suitable transformer is needed to feed the MR16 lamp. The round trim is finished in black matt for a recessed look that reads as a shadow rather than a bright ring. This fitting is part of the wider NAVI downlight range, with matching finishes available across the line.
Specification
| Power |
max 10W |
| Voltage |
12 AC; 12 DC |
| IP rating |
IP20 |
| Mounting |
Recessed Mount In The Ceiling |
| Cap / base |
Gx5.3 |
| Light source |
MR16 |
| Shape |
Round |
| Dimensions |
Ø75 × 26 mm |
| Weight |
46 g |
| Material |
Aluminium Alloy |
| Finish |
Black Matt |
Downloads
Frequently Asked
What size is the cut-out for the NAVI DS10?
The fitting has an overall face diameter of Ø75mm and a depth of 26mm, so plan your ceiling cut-out a little smaller than the trim so the bezel sits flush. Always check the supplied template against the spring-clip span before cutting. Its shallow 26mm depth suits ceilings with limited void space.
Does the NAVI DS10 come with a bulb?
No, the lamp is supplied separately. The fitting takes an MR16 lamp on a GX5.3 cap, so you can choose the wattage, beam angle and colour temperature that suit the room. It is rated for lamps up to 10W.
Does it need a transformer?
Yes. The NAVI DS10 runs at 12V (12 AC or 12 DC), so it needs a suitable transformer or driver to step the mains supply down for the MR16 lamp. Size the transformer to the total wattage of the lamps on the circuit.
How do I clean the NAVI DS10?
Wipe the black matt trim with a soft, dry cloth, switching the circuit off first and letting the lamp cool. Avoid abrasive cleaners that could mark the finish. Keep the fitting dry, as it is rated IP20 for indoor use only.