Description
The Narmessa is a linear pendant light built around a length of rustic brown wood, held at each end and at its hanging points by black steel brackets. Black steel dome shades hang beneath the beam, each finished pale inside, and the whole fitting hangs on black chains from a slim black ceiling plate. It measures 118cm long, 26cm wide and 110cm tall overall, a generous span for a long table. Each shade takes an E27 bulb, which is not included, so you can choose the colour and brightness that suit the space. It is rated IP20, which means it belongs indoors in a dry room.
A long pendant like this is made for a dining table, a kitchen island or a breakfast bar, where its length follows the surface and spreads light from one end to the other. The pairing of black steel and warm brown wood suits farmhouse, industrial and rustic interiors, and it sits comfortably against brick, plaster or painted walls. Because the light comes from several shades rather than a single one, the whole table is lit evenly, which makes it a good choice for anyone who eats, works or entertains around a long surface.
The beam is wood, so the grain and knots vary from one light to the next, and the black steel brackets give it a crisp, workshop look. There is no switch on the light itself, as it is switched at the wall, and it runs on 220-240V, 50/60Hz mains. It weighs 4.7KG, which is worth knowing when you plan where it will hang, and as a wired-in mains light it is installed by a qualified electrician. The installation instructions come as a download, so they can be read before the work begins. Have your E27 bulbs ready on the day and the table is lit the moment the work is finished.
Specification
| Body Material |
Steel, Wood |
| Body Colour |
Black & Rustic Brown |
| IP Rating |
IP20 |
| Light Source |
E27 (bulb not included) |
| Length |
118cm |
| Width |
26cm |
| Overall Height |
110cm |
| Weight |
4.7KG |
| Protection Class |
Class I |
| Voltage |
220-240V, 50/60Hz |
| Operating Voltage |
220-240V, 50/60Hz |
| Switch |
None (switched at the wall) |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can the Narmessa pendant go in a bathroom?
No. It is rated IP20, which means it is meant for indoor rooms that stay dry, such as a dining room or living room.
Are bulbs included?
No, the bulbs are not included. Each shade takes an E27 bulb, so you can pick the brightness and colour of light you prefer.
How big is the pendant?
It is 118cm long, 26cm wide and 110cm tall overall, so it suits a long dining table or a kitchen island well.
What materials does the light use?
The body combines steel and wood, with black steel shades and brackets set on a rustic brown wooden beam.
Does the light have its own switch?
No, there is no switch on the fitting itself. It is switched at the wall, so it works from your wall switch.
How heavy is it?
It weighs 4.7KG, which is useful to know when you are planning the spot where it will hang over your table.