Mini Riti GU10 Round Recessed Downlight B/G - Black/Gold

The Mini Riti B/G is a round recessed downlight built around a GU10 lamp holder, taking a single PAR16 reflector lamp rated up to 10W. It runs on a standard 220 to 240V AC mains supply, so no transformer is needed. In US terms a fitting of this kind is the familiar recessed can light, dropped into a ceiling void to sit flush with the surface. Output and beam depend on the GU10 lamp chosen, which lets the buyer set both the brightness and the spread to suit the spot being lit.

Because the brightness comes from the chosen GU10 lamp rather than an integrated source, the Mini Riti works well wherever a compact, swappable downlight is wanted: hallways, landings, kitchens and living areas indoors. A single fitting gives a focused pool of light rather than broad room fill, so several are usually spaced across a ceiling to build even coverage, with the exact spacing set by ceiling height and the beam angle of the lamp fitted. With its IP20 rating it is intended for dry indoor positions only and should be kept clear of bathrooms, porches and any damp or outdoor location.

The body is aluminium alloy in a black and gold finish, with a compact Ø85mm face and a depth of 102mm, weighing 172g. It recesses into the ceiling, so a matching cut-out is needed in the plasterboard above. Dimming is governed by the GU10 lamp and any wall dimmer used rather than the fitting itself, so pair it with a dimmable lamp where dimming is required. The Mini Riti sits within a wider range of mini downlights offered in several finishes.

What size cut-out does the Mini Riti need?

The fitting itself measures Ø85mm across the face with a recess depth of 102mm. Cut a hole in the ceiling slightly under the face diameter so the trim sits flush, and allow the full 102mm depth plus room for the lamp and wiring in the void above. Always confirm against the fitting before cutting.

Does it take a GU10 bulb and is it dimmable?

Yes, it uses a GU10 PAR16 lamp rated up to 10W, which is bought separately so you can pick the brightness, colour temperature and beam you want. Dimming depends on the lamp and dimmer rather than the fitting, so fit a dimmable GU10 and a compatible wall dimmer if you need to adjust the level.

How many do I need for a room?

Each Mini Riti gives a focused pool of light rather than whole-room fill, so they are usually installed in a spaced run across the ceiling. As a rough guide, space them by roughly the ceiling height and let the lamp beam angle decide the overlap, adding more for an even wash in larger or task areas.

How do I clean the fitting?

Switch off the power and let the lamp cool, then wipe the aluminium face and surround with a soft, dry or slightly damp cloth. Avoid solvents and abrasive cleaners, which can mark the black and gold finish. Take care not to disturb the recessed seating in the ceiling while cleaning.