Mileno 720x100 4 x GU10 Bar Ceiling Light - Silver / Copper

The Mileno is a four-head ceiling light built on a slim bar measuring 715 mm long, with each position taking a GU10 PAR16 lamp rated up to 10W. The four spots sit along the bar so each head can be angled independently, letting the light be aimed across a room or directed at specific points rather than fixed in one wash. It runs on 220-240V AC mains and works as a flush mount LED ceiling light style fitting once GU10 lamps are added, with the output and colour temperature set by whichever lamps you choose.

Because the four heads adjust separately, the Mileno suits rooms that need light pointed in more than one direction, such as a kitchen worktop and an adjoining dining spot, a home office, or a living area where seating and a reading corner each want their own beam. Coverage depends on the GU10 lamps fitted, so the practical reach is whatever those four lamps deliver once aimed; treat each head as lighting its own zone rather than flooding the whole room evenly. As a surface fitting it mounts directly to the ceiling or wall, which keeps it suited to standard and lower ceiling heights where a hanging fitting would sit too low.

The body is steel in a two-tone silver and copper finish, with the bar measuring 715 × 105 × 140 mm and weighing 820 g, so the four heads stay stable when angled. It carries an IP20 rating, which keeps it to dry indoor rooms only and out of bathrooms, porches or any damp or exposed location. GU10 lamps are not built in, letting you pick the wattage up to 10W per head, colour temperature and dimmable behaviour to suit the space. The Mileno range also includes other configurations if you need a different head count or layout.

How many rooms or zones can this fitting cover?

The four heads each adjust on their own, so the Mileno is best thought of as lighting four separate spots rather than one even wash. It works well over a worktop and a nearby table, or across a seating area and a reading corner. Total output depends entirely on the GU10 lamps you fit, since none are supplied.

Is this an integrated LED fitting or does it take replaceable bulbs?

It takes four GU10 PAR16 lamps, which are not included, so the bulbs are fully replaceable. Each position is rated for up to 10W, giving you a choice of brightness and colour temperature. This also means dimmable behaviour is set by the lamps and any dimmer you use, not the fitting itself.

Can the Mileno be used in a bathroom or outdoors?

No, it is rated IP20, which limits it to dry indoor rooms only. Keep it clear of bathrooms, shower areas, porches and any damp or exposed location. For those settings you would need a fitting with a higher IP rating.

How do I clean and maintain it?

Switch off the supply and let the GU10 lamps cool before touching them. Wipe the steel bar and heads with a soft, dry or barely damp cloth, avoiding harsh cleaners that could mark the silver and copper finish. Check that each head is firmly seated after cleaning so the beams stay aimed where you want them.