Description
The Mera LED is a slim rectangular LED ceiling light running 10W from a 220-240V AC supply to put out 1040 lumens at a 4000K cool white tone. With a wide 150 degree beam, the light spreads broadly rather than throwing a tight pool, giving even coverage across a small space. North American buyers will recognise the format as a low-profile flush mount LED ceiling light, sitting close to the surface with no projecting bulb. The integrated LED draws roughly 104 lumens per watt, and at Ra 80 colour rendering it gives a clean, neutral white that suits everyday rooms.
Around 1040 lumens makes the Mera suited to compact areas, covering roughly 3 m² at general lighting levels, so it works well in a hallway, small landing, utility space or as one of several fittings in a larger room. The crisp 4000K output and broad spread give a bright, practical wash rather than a warm ambient glow. It is rated IP20 and is for dry indoor use only, so keep it clear of bathrooms, porches and any damp or outdoor positions.
Built with a white plastic body measuring 538 by 23 by 36 mm and weighing just 210 g, the Mera is light enough for straightforward fixing and can be mounted on either a wall or a ceiling. The LED module is integrated, so there is no separate bulb to replace, and it is rated for around 30,000 hours of use. This version is not dimmable and runs direct from mains voltage. The white finish keeps it discreet against most surfaces.
Specification
| Power |
10W |
| Voltage |
220-240 AC |
| Luminous flux |
1040 lm |
| Efficiency |
104 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
150° |
| IP rating |
IP20 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
30,000 hours |
| Shape |
Rectangular |
| Dimensions |
538 × 23 × 36 mm |
| Weight |
210 g |
| Material |
Plastic |
| Finish |
White |
Downloads
Frequently Asked
How big a room does it light?
At 1040 lumens it covers around 3 m² at general lighting levels, making it well suited to a hallway, small landing or utility room. In larger spaces it works best used in multiples to build up even coverage.
Can it be used outdoors or in a bathroom?
No. The Mera is rated IP20, which means dry indoor use only. It should not be fitted in bathrooms, porches, carports or any damp or outdoor location.
Does it take a replaceable bulb?
No, the LED module is integrated into the fitting, so there is no bulb to change. It is rated for around 30,000 hours of use, which is many years at typical domestic running times.
How do I keep it clean?
Wipe the white plastic surface with a soft, dry or slightly damp cloth once the fitting is switched off and cool. Avoid abrasive cleaners and solvents, which can mark the finish over time.