Free Delivery on all orders over £99*

LYYT Deep Section Surface Mount LED Profile - 1m

£799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The LYYT deep-section LED profile is a 1m aluminium extrusion with a 16mm x 12mm external cross-section and an 11mm x 9mm internal cavity, designed to house LED tape behind an 11mm-wide frosted diffuser. The deeper 12mm profile provides better light blending than shallow profiles, reducing the appearance of individual LED hotspots on short tape runs.

Designed for surface mounting on walls, under cabinets, shelving, display cases and ceilings, the profile ships with end caps, mounting clips and a snap-in diffuser. The aluminium body acts as a heat sink to extend LED tape lifespan, while the frosted diffuser converts the individual diodes into a continuous light line. The 1m length can be cut to size on site using a hacksaw or mitre saw.

The 11mm visible diffuser width gives a narrow, defined line of light that works for accent lighting, task lighting under kitchen cabinets, or highlighting shelving in retail and residential settings. The silver anodised aluminium finish blends with most neutral interiors and provides a clean edge to the light run. LED tape is sold separately and must be 11mm wide or narrower to fit inside the 11mm internal cavity width.

Specification
External cross-section 16 x 12mm
Internal cross-section 11 x 9mm
Diffuser visible width 11mm
Length 1m
Frequently Asked

What width of LED tape does this profile accept?

The internal cavity measures 11mm wide, so the profile accepts LED tape up to 11mm in width. Standard 10mm and 8mm LED tapes fit comfortably. LED tape is sold separately.

Can the profile be cut to length?

Yes. The 1m aluminium extrusion can be cut to any shorter length using a hacksaw or mitre saw. Cut slowly to avoid burrs and deformation of the profile edges.

What's included in the box?

Each 1m profile includes the aluminium extrusion, the frosted snap-in diffuser, two end caps and mounting clips for surface installation. LED tape, power supply and cable are sold separately.

How is it mounted?

The profile surface-mounts using the included clips, which screw into the wall or ceiling and hold the aluminium extrusion in place. The diffuser then clips into the profile once the LED tape is installed and wired.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The LYYT deep-section LED profile is a 1m aluminium extrusion with a 16mm x 12mm external cross-section and an 11mm x 9mm internal cavity, designed to house LED tape behind an 11mm-wide frosted diffuser. The deeper 12mm profile provides better light blending than shallow profiles, reducing the appearance of individual LED hotspots on short tape runs.

    Designed for surface mounting on walls, under cabinets, shelving, display cases and ceilings, the profile ships with end caps, mounting clips and a snap-in diffuser. The aluminium body acts as a heat sink to extend LED tape lifespan, while the frosted diffuser converts the individual diodes into a continuous light line. The 1m length can be cut to size on site using a hacksaw or mitre saw.

    The 11mm visible diffuser width gives a narrow, defined line of light that works for accent lighting, task lighting under kitchen cabinets, or highlighting shelving in retail and residential settings. The silver anodised aluminium finish blends with most neutral interiors and provides a clean edge to the light run. LED tape is sold separately and must be 11mm wide or narrower to fit inside the 11mm internal cavity width.

    Specification
    External cross-section 16 x 12mm
    Internal cross-section 11 x 9mm
    Diffuser visible width 11mm
    Length 1m
    Frequently Asked

    What width of LED tape does this profile accept?

    The internal cavity measures 11mm wide, so the profile accepts LED tape up to 11mm in width. Standard 10mm and 8mm LED tapes fit comfortably. LED tape is sold separately.

    Can the profile be cut to length?

    Yes. The 1m aluminium extrusion can be cut to any shorter length using a hacksaw or mitre saw. Cut slowly to avoid burrs and deformation of the profile edges.

    What's included in the box?

    Each 1m profile includes the aluminium extrusion, the frosted snap-in diffuser, two end caps and mounting clips for surface installation. LED tape, power supply and cable are sold separately.

    How is it mounted?

    The profile surface-mounts using the included clips, which screw into the wall or ceiling and hold the aluminium extrusion in place. The diffuser then clips into the profile once the LED tape is installed and wired.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.