Description
The Lunaro is a horizontal wall light built around a 230mm bar of natural travertine in a light beige tone, with a single opal glass globe mounted at one end and a beaded pull-switch chain hanging beneath. The bar measures 120mm tall and takes a single G9 lamp (sold separately) inside the globe, giving a soft diffused light source that washes across the stone surface.
Designed for bedside use, reading corners, hallways and lounge walls, the Lunaro mounts directly to the wall and is operated by the integrated pull-chain rather than a wall switch, which makes it useful in retrofit positions where no switched spur is available. Fitted in pairs either side of a bed or sofa, the bar geometry frames the furniture symmetrically; fitted as a single unit beside an armchair, it works as accessible reading light.
Each travertine bar is cut from natural stone, so the open pores, mineral banding and tonal variation differ between individual pieces. The light beige base colour reads warm against white and off-white walls and pairs cleanly with oak, walnut and rattan furniture. The opal glass globe diffuses the G9 lamp evenly and softens the contrast between the lit globe and the textured stone behind it.
Specification
| Material |
Travertine & Glass |
| Finish |
Light Beige |
| Height |
120mm |
| Length |
230mm |
| Lamp Socket |
G9 |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
What bulb does it take?
The Lunaro takes a single G9 capsule bulb (sold separately). A 2700K-3000K warm white LED of around 3-4W pairs well with the opal glass globe and matches the warm tone of the travertine.
How is it switched on and off?
The fitting is operated by the beaded pull-chain that hangs beneath the bar, so it does not require a separate wall switch. It still needs to be hard-wired to a mains feed during installation.
Will the travertine vary between pieces?
Yes. Travertine is a natural stone with open pores and mineral banding, so the surface texture, colour depth and pattern vary between individual bars. This is a feature of the material rather than a defect.
Can it be used in a bathroom?
The Lunaro does not carry a stated IP rating, so it should be installed in dry indoor locations only. Bedrooms, hallways, living rooms and reading corners are suitable; bathrooms and other zoned wet areas are not.