Description
The Lunaris is a 500mm vertical wall light built around a column of natural Spanish alabaster set inside a slim black metal frame. An integrated 16W LED runs the full length of the alabaster, casting a soft 3000K warm white glow through the stone. The fitting projects 80mm from the wall and is 120mm wide, with a rounded termination at the base that softens the otherwise strict linear geometry.
Designed for hallways, bedrooms, dressing areas and bathroom-adjacent spaces, the Lunaris works equally well mounted vertically beside a mirror, flanking a bed as a pair, or running up a stairwell wall as a sequence. The slim 80mm projection keeps it close to the wall in narrow circulation spaces, and the integrated LED removes any need for bulb changes. Mounting hardware is concealed behind the back plate to keep the front face clean.
The alabaster column is cut from natural Spanish stone, so each piece carries different internal veining, clouding and tonal variation that becomes most visible when the LED is on. The dark metal frame gives a high-contrast outline against pale walls and lets the lit alabaster read as the focus of the fitting rather than the housing. Brass internal construction sits behind the black exterior finish, supporting the weight of the stone without visible fixings on the front face.
Specification
| Material |
Brass & Natural Spanish Alabaster |
| Finish |
Soft White & Black |
| Height |
500mm |
| Width |
120mm |
| Projection |
80mm |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K |
| Voltage |
230V |
| Wattage |
16W |
| Weight |
- |
| Warranty |
2 Year |
Frequently Asked
Can the Lunaris be used in a bathroom?
No IP rating is listed on this fitting, so it should not be installed within bathroom IP zones. It is suited to bedrooms, hallways, dressing rooms and living spaces. For bathroom-rated alabaster wall lighting, please contact us for alternatives.
Can it be mounted horizontally?
The Lunaris is designed as a vertical wall light, with the rounded termination at the base. It can be installed horizontally if preferred, though the visual balance of the rounded base detail is intended to read with the column running upright.
Does it need a bulb?
No. The LED is integrated into the fitting and runs the full length of the alabaster column at 16W, 3000K. There is no replaceable bulb, so the light source is sealed within the fitting.
How is the alabaster cleaned?
Alabaster is porous and softer than marble. Wipe with a dry, soft microfibre cloth. Avoid household sprays, polishes, abrasive cloths and any chemical cleaners, as these can mark or dull the natural stone.