Free Delivery on all orders over £99*

IP65 Microwave & Daylight Sensor Remote Control

£2599
The RRP is the manufacturer's recommended retail price of the item.
32 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is the hand-held programmer for microwave and daylight sensors: a white handset with forty labelled buttons that set how a sensor behaves without anyone touching the fitting. The top row carries ON/OFF, Reset, Auto Mode and Dim Test, with four quick setting presets beneath. The rest of the keypad is grouped by job: detection area at 25, 50, 75 or 100 per cent, hold time from 5 seconds to 30 minutes, standby dim level at 10, 20, 30 or 50 per cent, standby period from 0 seconds to indefinite, and a daylight threshold from 5 lux to 150 lux, or disabled. A two second test key runs a short trigger cycle. The handset is rated IP65.

Commissioning is where it earns its keep. Sensors are often adjusted by dip switch or a small dial on the fitting itself, which means a ladder every time a corridor holds light too long or a stairwell cuts out too early. With the handset you stand underneath, point up and change the setting in a moment. It suits corridors, stairwells, store rooms, car parks and communal landings, and the IP65 rating means it can be used in damp areas, including bathroom zones 1 and 2 but not zone 0. Check your sensor's own instructions first, since it works only with sensors built to accept a handset of this kind.

Two settings are the ones people change most. Hold time is how long the light stays at full output after the last movement. Standby period is what happens next: output drops to the dim level you picked and holds there for a set time or indefinitely, so a stairwell is never pitch dark. The daylight threshold stops the sensor triggering when there is already enough natural light. The remote is sold singly, with a minimum order of one.

Specification
Type Hand-held remote control for microwave & daylight sensors
Finish White
IP rating IP65
Dimmable Yes, sets standby dim levels of 10, 20, 30 or 50 per cent
Sold as Single remote control
Minimum order 1, sold in multiples of 1
Frequently Asked

Which sensors will this remote work with?

It is made for microwave and daylight sensors built to accept a handset of this type. Check your sensor's own instructions before ordering, because not every sensor allows remote programming.

How far away can I stand when I use it?

The manufacturer does not state a working distance. Treat it as a line of sight tool, point the handset squarely at the sensor head from below and press firmly.

What is the difference between hold time and standby period?

Hold time is how long full output lasts after the last movement. Standby period is how long the fitting then sits at the reduced dim level before it switches off.

What does the lux setting change?

It sets the daylight threshold, so the sensor ignores movement when the room is already brighter than the level you chose. Values run from 5 lux to 150 lux, or disabled.

Can I use it in a bathroom?

Yes. The IP65 rating covers zones 1 and 2, though not zone 0, so it can be used in a shower room or a wet plant area.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is the hand-held programmer for microwave and daylight sensors: a white handset with forty labelled buttons that set how a sensor behaves without anyone touching the fitting. The top row carries ON/OFF, Reset, Auto Mode and Dim Test, with four quick setting presets beneath. The rest of the keypad is grouped by job: detection area at 25, 50, 75 or 100 per cent, hold time from 5 seconds to 30 minutes, standby dim level at 10, 20, 30 or 50 per cent, standby period from 0 seconds to indefinite, and a daylight threshold from 5 lux to 150 lux, or disabled. A two second test key runs a short trigger cycle. The handset is rated IP65.

    Commissioning is where it earns its keep. Sensors are often adjusted by dip switch or a small dial on the fitting itself, which means a ladder every time a corridor holds light too long or a stairwell cuts out too early. With the handset you stand underneath, point up and change the setting in a moment. It suits corridors, stairwells, store rooms, car parks and communal landings, and the IP65 rating means it can be used in damp areas, including bathroom zones 1 and 2 but not zone 0. Check your sensor's own instructions first, since it works only with sensors built to accept a handset of this kind.

    Two settings are the ones people change most. Hold time is how long the light stays at full output after the last movement. Standby period is what happens next: output drops to the dim level you picked and holds there for a set time or indefinitely, so a stairwell is never pitch dark. The daylight threshold stops the sensor triggering when there is already enough natural light. The remote is sold singly, with a minimum order of one.

    Specification
    Type Hand-held remote control for microwave & daylight sensors
    Finish White
    IP rating IP65
    Dimmable Yes, sets standby dim levels of 10, 20, 30 or 50 per cent
    Sold as Single remote control
    Minimum order 1, sold in multiples of 1
    Frequently Asked

    Which sensors will this remote work with?

    It is made for microwave and daylight sensors built to accept a handset of this type. Check your sensor's own instructions before ordering, because not every sensor allows remote programming.

    How far away can I stand when I use it?

    The manufacturer does not state a working distance. Treat it as a line of sight tool, point the handset squarely at the sensor head from below and press firmly.

    What is the difference between hold time and standby period?

    Hold time is how long full output lasts after the last movement. Standby period is how long the fitting then sits at the reduced dim level before it switches off.

    What does the lux setting change?

    It sets the daylight threshold, so the sensor ignores movement when the room is already brighter than the level you chose. Values run from 5 lux to 150 lux, or disabled.

    Can I use it in a bathroom?

    Yes. The IP65 rating covers zones 1 and 2, though not zone 0, so it can be used in a shower room or a wet plant area.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.