Free Delivery on all orders over £99*

20W GU10 Tilted Spotlight Fitting - IP20 - Quick Connect - White

£1599
The RRP is the manufacturer's recommended retail price of the item.
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This is a recessed spotlight fitting with a tilting inner ring, so the light can be aimed rather than left pointing straight down at the floor. The front bezel is white and sits against the ceiling, with a black cylindrical body behind it and a pair of sprung retaining clips that grip the board once the fitting is pushed up into the hole. It takes a GU10 lamp, is rated at 20W and carries an IP20 rating, and a quick connect terminal block on a short lead handles the mains connection.

Tilting downlights earn their keep where a fixed one would be wasted. Angle them at a wall to wash it with light, at a run of shelves, at artwork, or forward over a kitchen worktop so the light lands on the surface rather than on whoever is standing at it. They also suit a sloped ceiling, where a fixed lamp fires off at whatever angle the roof happens to sit at. We stock the same tilted fitting with a chrome bezel, along with GU10 fittings at IP65, including a fire rated white version.

GU10 is the twist and lock cap with two stubby pins, so if you are swapping an old fitting, pull its lamp out and check for pins rather than a bayonet or a screw thread. The lamp you choose sets the character of the light: around 2700K for a warm living room, 4000K for something crisper over a worktop. The manufacturer states the fitting is dimmable, and since the lamp does the dimming in a holder of this kind, pick a GU10 marked dimmable and a dimmer rated for LED loads. IP20 means no protection against water, so keep it to dry indoor ceilings. It is sold singly with a minimum order of one, so you can buy exactly the number of holes you are cutting.

Specification
Type Recessed tilting spotlight (downlight)
Lamp fitting GU10
Wattage 20W
Finish White
IP rating IP20
Dimmable Yes
Sold as 1 fitting
Minimum order 1, sold in multiples of 1
Frequently Asked

Does this come with a GU10 lamp?

The manufacturer does not state whether a lamp is supplied with the fitting, so plan on buying a GU10 lamp separately when you order.

What colour of light will it give?

That is set by the lamp rather than the fitting. No colour temperature is stated here, so choose a GU10 at around 2700K for warm light or 4000K for something cooler, and note that no wattage equivalence figure is given either.

How far does the head tilt?

The inner ring sits on a tilting mount so the lamp can be angled away from vertical, but the manufacturer does not state the maximum angle in degrees.

What size hole does it need?

No cut-out diameter is stated by the manufacturer for this model, so please do not cut the ceiling until that figure has been confirmed for the fitting you receive.

Will it work on a dimmer?

The manufacturer states that it is dimmable. A holder of this kind passes mains straight to the lamp, so fit a GU10 marked dimmable and use a dimmer rated for LED loads.

Is this fitting fire rated?

No fire rating is stated for this model. Where a fire rated downlight is needed, the IP65 fire rated white GU10 fitting in our range is the one to look at.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard GU10 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This is a recessed spotlight fitting with a tilting inner ring, so the light can be aimed rather than left pointing straight down at the floor. The front bezel is white and sits against the ceiling, with a black cylindrical body behind it and a pair of sprung retaining clips that grip the board once the fitting is pushed up into the hole. It takes a GU10 lamp, is rated at 20W and carries an IP20 rating, and a quick connect terminal block on a short lead handles the mains connection.

    Tilting downlights earn their keep where a fixed one would be wasted. Angle them at a wall to wash it with light, at a run of shelves, at artwork, or forward over a kitchen worktop so the light lands on the surface rather than on whoever is standing at it. They also suit a sloped ceiling, where a fixed lamp fires off at whatever angle the roof happens to sit at. We stock the same tilted fitting with a chrome bezel, along with GU10 fittings at IP65, including a fire rated white version.

    GU10 is the twist and lock cap with two stubby pins, so if you are swapping an old fitting, pull its lamp out and check for pins rather than a bayonet or a screw thread. The lamp you choose sets the character of the light: around 2700K for a warm living room, 4000K for something crisper over a worktop. The manufacturer states the fitting is dimmable, and since the lamp does the dimming in a holder of this kind, pick a GU10 marked dimmable and a dimmer rated for LED loads. IP20 means no protection against water, so keep it to dry indoor ceilings. It is sold singly with a minimum order of one, so you can buy exactly the number of holes you are cutting.

    Specification
    Type Recessed tilting spotlight (downlight)
    Lamp fitting GU10
    Wattage 20W
    Finish White
    IP rating IP20
    Dimmable Yes
    Sold as 1 fitting
    Minimum order 1, sold in multiples of 1
    Frequently Asked

    Does this come with a GU10 lamp?

    The manufacturer does not state whether a lamp is supplied with the fitting, so plan on buying a GU10 lamp separately when you order.

    What colour of light will it give?

    That is set by the lamp rather than the fitting. No colour temperature is stated here, so choose a GU10 at around 2700K for warm light or 4000K for something cooler, and note that no wattage equivalence figure is given either.

    How far does the head tilt?

    The inner ring sits on a tilting mount so the lamp can be angled away from vertical, but the manufacturer does not state the maximum angle in degrees.

    What size hole does it need?

    No cut-out diameter is stated by the manufacturer for this model, so please do not cut the ceiling until that figure has been confirmed for the fitting you receive.

    Will it work on a dimmer?

    The manufacturer states that it is dimmable. A holder of this kind passes mains straight to the lamp, so fit a GU10 marked dimmable and use a dimmer rated for LED loads.

    Is this fitting fire rated?

    No fire rating is stated for this model. Where a fire rated downlight is needed, the IP65 fire rated white GU10 fitting in our range is the one to look at.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.