Lucenza LED Halo Ring Alabaster Chandelier 80cm - Brushed Brass

The Lucenza is an 800mm halo ring chandelier built around a brushed brass band lined with a continuous run of natural Spanish alabaster segments along its outer face. An integrated 3000K LED sits inside the ring, lighting the alabaster from within so the stone itself glows. The fitting suspends from a brushed brass ceiling canopy on three fine steel cables, with a 1500mm maximum drop adjustable on installation.

Designed for dining rooms, open-plan kitchens, hallway voids and stairwell landings with ceiling heights of 2.6m or higher, the Lucenza works as a single anchoring fitting above a dining table or kitchen island. The open ring throws light downward onto the surface below while the alabaster segments cast a softer perimeter glow outward, giving both task and ambient light from one fixture. The slim 70mm height keeps the silhouette low-profile relative to its 800mm diameter.

The alabaster band is composed of vertical segments cut from natural stone, each showing different mineral veining and translucency, so the ring lights unevenly across its circumference rather than as a uniform glow. The stainless steel structure is finished in warm brushed brass that pairs with the soft white tone of the lit alabaster. At 800mm diameter the ring suits dining tables of 1.4-1.8m length and kitchen islands of similar scale without crowding the space above.

What size table or island does the Lucenza suit?

The 800mm diameter ring works above dining tables of 1.4-1.8m length and kitchen islands of similar proportions. As a general guide the fitting should be around half the width of the surface below it.

How high should it hang above a table?

Most users hang the ring 700-800mm above the table surface, which works in rooms with ceiling heights of 2.6m or above. The 1500mm cables are adjustable on installation, so the drop can be shortened to suit lower ceilings.

Is the LED dimmable?

The fitting uses an integrated 3000K LED on 230V mains. Dimmer compatibility depends on the specific dimmer driver pairing, so please contact us before installing on a dimmed circuit to confirm.

Will each chandelier look the same?

No. The alabaster segments are cut from natural Spanish stone, so the veining, tonal variation and translucency differ between individual pieces and across the ring itself. This is a feature of the natural material rather than a defect.