Description
This is a broad circular suspension plate finished in French Gold, made to take a flush fitting and hang it lower in the room. The fitting sits beneath the plate on a power cable, so a design meant to sit tight against the ceiling instead reads as a pendant. At 74cm across, the plate is wide enough to look deliberate rather than incidental, and the cable allows a drop of up to 3m with shorter settings for more ordinary heights.
We reach for this where a room has the height to spare and a flush fitting alone would look lost far overhead: stairwells, double-height halls, galleried landings, a dining room with a tall ceiling. It brings the light down to a height where it does some work, and puts the detail of the fitting where it can be seen. It suits anyone who has fallen for a flush design but needs it to hang, and it works as well over a long table as in the middle of a generous entrance hall. We stock it in this gold and in a polished chrome of the same diameter.
The plate carries a load of up to 40kg, which covers all but the heaviest fittings, and the power cable comes fitted. The French Gold finish has a warm, slightly antique cast that flatters brass and crystal alike. Keep it looking well by dusting with a clean, dry lint-free cloth; nothing abrasive and no solvent-based sprays, which dull plated gold. It carries a two year warranty. Smaller diameters in the same gold run through the range, so a matching plate can be chosen to suit the fitting it carries.
Specification
| Colour |
French Gold |
| Second Colour |
Painted Gold |
| Weight |
7.00KG |
| Diameter |
740mm |
| Minimum Drop (mm) |
350mm |
| Maximum Drop (mm) |
3000mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Wire |
| Energy Class |
Not Applicable |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
| Protection Class |
Non-Electric |
| IP Rating |
IP20 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Base Dimensions (mm) |
D:200mm x H:25mm |
| Plate Dimensions (mm) |
D:250mm x T:1.0mm |
| Bracket Dimensions (mm) |
D:180mm x T:2.0mm |
| Cable Information |
3x0.75mm clear double insulated cord mm with D2.0mm x L:3000mm rope wire |
| Pieces Included |
1 |
Frequently Asked
How far down can the fitting hang?
The power cable gives a drop from 350mm at its shortest to 3000mm at full extension, so you can set the height to suit the room.
How heavy a fitting will it take?
The maximum load is 40kg, and it has been tested with the maker's own flush fittings.
What is the diameter of the plate?
It measures 740mm across, which is the largest French Gold plate in this range apart from the 79cm.
Does it come with a light source?
No. The plate is a non-electrical accessory, so the lamp is whatever the flush fitting you suspend from it takes.
How should the gold finish be cleaned?
Dust it with a dry, lint-free cloth. Avoid cream cleaners, polishes and solvent sprays, as these can mark plating.
Is there a warranty?
It carries a two year warranty.