Loop 3 Light Flush Ceiling Light - Polished Chrome

The Loop is a 3-light flush ceiling fitting with a polished chrome tri-arm frame that curves around three frosted glass spheres, each housing a single G9 bulb (sold separately). The frame is mounted directly to the ceiling rose with a minimal 120mm projection from ceiling to base of the glass, making it one of the lower-profile multi-light fittings available for rooms with ceiling heights below 2.4m.

Designed for hallways, bedrooms, kitchens and bathrooms where a central pendant would hang too low, the Loop provides three separate light sources across a 320mm span without the drop of a suspension fitting. The curved chrome arms distribute the light positions in a triangular pattern, reducing shadows compared to a single-bulb flush fitting. The frosted outer layer of each glass sphere diffuses the G9 bulb inside, softening the light output and reducing glare when viewed from below.

The polished chrome finish on the frame and ceiling mount reflects both daylight and artificial light, amplifying brightness in smaller or darker rooms. Each glass sphere combines a frosted outer surface with a clear inner core, creating a layered visual effect when lit. The 1.4kg weight sits comfortably on standard UK ceiling fixings without additional support, and the fitting works on 220-240V mains with no transformer required.

Dimmer compatibility depends on the G9 bulbs chosen — pair with dimmable G9 LEDs and a compatible LED dimmer to adjust light levels. Most G9 LED bulbs range between 2W-5W and provide equivalent output to traditional 20W-40W halogen capsules, with colour temperatures typically between 2700K-3000K for warm white or 4000K+ for cool white.

Is the Loop suitable for low ceilings?

Yes. The 120mm height from ceiling to base of the glass makes it one of the more compact multi-light flush fittings available. It works well in rooms with ceiling heights of 2.2m-2.4m where a pendant would hang into headroom.

What G9 bulbs does it take?

The Loop takes three G9 capsule bulbs, sold separately. Most users pair it with 2W-5W G9 LED bulbs in warm white (2700K-3000K). The frosted glass diffuses the light, so the bulb shape (pin or capsule) is less critical than with clear glass fittings.

Can it be used in a bathroom?

The Loop carries no IP rating in the specification, so it should be installed outside bathroom zones 0, 1 and 2 (typically at least 600mm from a shower enclosure or bath edge). For ceiling positions directly above a bath or shower, choose an IP44 or IP65 rated fitting.

Is it dimmable?

Yes, when paired with dimmable G9 bulbs and a compatible LED dimmer switch. Non-dimmable G9 bulbs will not dim and may flicker or fail if used with a dimmer. Check bulb packaging for dimmer compatibility before pairing.